Custom-Built Heater B-2 Titanium Driver
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Custom-Built Heater B-2 Titanium Driver
- compare to TaylorMade® M2™
- The new 2017 Heater B-2 Driver: additional distance plus forgiveness at the same time. In most cases, a driver would deliver one benefit at the expense of the other, but the Heater B2 gives golfers the best of both worlds.
- Discretionary weight is strategically relocated lower and further back on the sole for a more efficient power transfer; giving golfers more ball speed.
- Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Conventional driver heads have a tig welding line behind the face, our innovative cup face design allows for welding on the body shell. This technique reduces the risk of cracks and makes the face thinner and wider promoting faster ball speed and more distance.
- Enlarged Sweet Spot: In order to make the B2 driver both long and forgiving, it was built with technologies that protect both ball speed and create a massive sweet spot. The Heater B2 is engineered with high MOI and a redesigned Recoil Pocket €“ two features that combine to produce maximum forgiveness and speed across the face. Heater's B2 Recoil Pocket is an area that allows the face to flex additionally and create higher ball speeds over a larger portion of the face.
- The expanded face-to-back distance of 112 mm increases the MOI for improved forgiveness and increased distance.
- Please allow 3 business days for club building.
| Loft | Lie | Wgt. | Vol. | Angle | Face Height | ||||
|
|
|||||||||
| 8.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 9.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 10.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 12° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 14° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| Right Hand: | 8.5° - 14° | Material: | Forged 6AL4V Titanium |
| Finish: | Black | Hosel Bore: | 0.335" |
| Driver Breadth: | 112 mm | Bulge/Roll: | 11"/9" |
Description
Custom-Built Heater B-2 Titanium Driver
- compare to TaylorMade® M2™
- The new 2017 Heater B-2 Driver: additional distance plus forgiveness at the same time. In most cases, a driver would deliver one benefit at the expense of the other, but the Heater B2 gives golfers the best of both worlds.
- Discretionary weight is strategically relocated lower and further back on the sole for a more efficient power transfer; giving golfers more ball speed.
- Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Conventional driver heads have a tig welding line behind the face, our innovative cup face design allows for welding on the body shell. This technique reduces the risk of cracks and makes the face thinner and wider promoting faster ball speed and more distance.
- Enlarged Sweet Spot: In order to make the B2 driver both long and forgiving, it was built with technologies that protect both ball speed and create a massive sweet spot. The Heater B2 is engineered with high MOI and a redesigned Recoil Pocket €“ two features that combine to produce maximum forgiveness and speed across the face. Heater's B2 Recoil Pocket is an area that allows the face to flex additionally and create higher ball speeds over a larger portion of the face.
- The expanded face-to-back distance of 112 mm increases the MOI for improved forgiveness and increased distance.
- Please allow 3 business days for club building.
Specification
| Loft | Lie | Wgt. | Vol. | Angle | Face Height | ||||
|
|
|||||||||
| 8.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 9.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 10.5° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 12° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| 14° | 58° | 200 g | 460 cc | 1° closed | 56 mm | ||||
| Right Hand: | 8.5° - 14° | Material: | Forged 6AL4V Titanium |
| Finish: | Black | Hosel Bore: | 0.335" |
| Driver Breadth: | 112 mm | Bulge/Roll: | 11"/9" |
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Karl on Oct 17, 2020
A
mens club length for #7 iron is 37 inches. if i build a driver with 37" club length, the long wood shaft will become too stick and might break. I do not suggest a driver length of 37 inches. The lie angle of driver head is not designed for this short club length.
Answered by Monark Golf Admin on Oct 22, 2020
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Coachmccrackin on Mar 7, 2021
A
none of the component heads are submitted to the USGA for testing. There is no test result from USGA. this does not mean that it will not pass the test. it is simply not submitted to the USGA.
Answered by Monark Golf Admin on Mar 13, 2021
Was the above review useful to you? 
