Custom-Built Integra i-Win Single Length Hybrid
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Custom-Built Integra i-Win Single Length Hybrid
- The new Integra i-Win Single-Length Hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length. You also can mix and match the iWin SLH Hybrids with the iWin SL irons too. Contrary to traditional hybrids that vary in length, the SLH hybrids are all designed to be the same length throughout the entire set and have the exact same swingweight and flex, so the golfer only has to "learn" one swing that works for him or her. This enables the golfer's swing to become more easily repeatable. The suggested men's length for the iWin Single Length hybrids is 37.5" (graphite) and 37" (steel), which is a typical 7 iron length.
- The same length design allows to have the same stance, same posture and the exact swing plane for every shot regardless of iron number. These are the factors that allow you to only need just that one swing no matter what shot you are taking. Golf got easier now. If you are looking for consistence in your iron game, single-length is the way to go.
- 8 lofts available from 21º to 45º to fit any golfer.
- Assembly Instruction for Single Length Hybrids: These hybrids are assembled differently because the head weights stay the same throughout the set. Tip trim the shaft for all heads if it were a #7-iron, regardless if the head is a #4, #9 or SW, i.e. do not tip trim shafts in increments. Cut the butt end to length for all clubs in the set as if were a 7-iron. If someone orders a set +1/2", then make that length ½" over your standard #7-iron length for all clubs.
- Please allow 3 business days for club building.
| No. | Loft | Lie | Weight | Offset | Vol. | Club Length | |||
|
|
|||||||||
| #4 | 21° | 62.25° | 272 g | -2.25 mm | 140 cc | 37" | |||
| #5 | 25° | 62.25° | 272 g | -2.75 mm | 138 cc | 37" | |||
| #6 | 28° | 62.25° | 272 g | -3.25 mm | 135 cc | 37" | |||
| #7 | 31° | 62.25° | 272 g | -3.75 mm | 132 cc | 37" | |||
| #8 | 34° | 62.25° | 272 g | -4.25 mm | 130 cc | 37" | |||
| #9 | 38° | 62.25° | 272 g | -4.75 mm | 128 cc | 37" | |||
| PW | 42° | 62.25° | 272 g | -5.25 mm | 125 cc | 37" | |||
| SW | 45° | 62.25° | 272 g | -5.25 mm | 125 cc | 37" | |||
| Right Hand: | 21º - 45º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 39 mm (20º) | Face-Rear: | 68 mm (20º) |
Description
Custom-Built Integra i-Win Single Length Hybrid
- The new Integra i-Win Single-Length Hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length. You also can mix and match the iWin SLH Hybrids with the iWin SL irons too. Contrary to traditional hybrids that vary in length, the SLH hybrids are all designed to be the same length throughout the entire set and have the exact same swingweight and flex, so the golfer only has to "learn" one swing that works for him or her. This enables the golfer's swing to become more easily repeatable. The suggested men's length for the iWin Single Length hybrids is 37.5" (graphite) and 37" (steel), which is a typical 7 iron length.
- The same length design allows to have the same stance, same posture and the exact swing plane for every shot regardless of iron number. These are the factors that allow you to only need just that one swing no matter what shot you are taking. Golf got easier now. If you are looking for consistence in your iron game, single-length is the way to go.
- 8 lofts available from 21º to 45º to fit any golfer.
- Assembly Instruction for Single Length Hybrids: These hybrids are assembled differently because the head weights stay the same throughout the set. Tip trim the shaft for all heads if it were a #7-iron, regardless if the head is a #4, #9 or SW, i.e. do not tip trim shafts in increments. Cut the butt end to length for all clubs in the set as if were a 7-iron. If someone orders a set +1/2", then make that length ½" over your standard #7-iron length for all clubs.
- Please allow 3 business days for club building.
Specification
| No. | Loft | Lie | Weight | Offset | Vol. | Club Length | |||
|
|
|||||||||
| #4 | 21° | 62.25° | 272 g | -2.25 mm | 140 cc | 37" | |||
| #5 | 25° | 62.25° | 272 g | -2.75 mm | 138 cc | 37" | |||
| #6 | 28° | 62.25° | 272 g | -3.25 mm | 135 cc | 37" | |||
| #7 | 31° | 62.25° | 272 g | -3.75 mm | 132 cc | 37" | |||
| #8 | 34° | 62.25° | 272 g | -4.25 mm | 130 cc | 37" | |||
| #9 | 38° | 62.25° | 272 g | -4.75 mm | 128 cc | 37" | |||
| PW | 42° | 62.25° | 272 g | -5.25 mm | 125 cc | 37" | |||
| SW | 45° | 62.25° | 272 g | -5.25 mm | 125 cc | 37" | |||
| Right Hand: | 21º - 45º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 39 mm (20º) | Face-Rear: | 68 mm (20º) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Stephen on Nov 9, 2023
A
we no longer provide lie bending. Lie Bending was only available for irons. Hybrids were not for bending.
Answered by Monark Golf Admin on Nov 9, 2023
Q
Do you find this helpful? YES NO
Asked by Stephen on Nov 9, 2023
A
the online fitting wizard is just a general guidance without considering individual concerns. for best results a fitting at a professional club fitter with swing analyzer and swing monitor is suggested. it is your decision which club length you select.
Answered by Monark Golf Admin on Nov 9, 2023
the mens recommended club length is for graphite shafts; it is a reference point. if you wish the club length -1" shorter than Mens standard, please select -1" Mens from drop down menu.
Answered by Monark Golf Admin on Nov 9, 2023
See all 3 questions for this product
Was the above review useful to you? 
