Heater BMT-2 Adjustable Titanium Driver Component Kit

 
0 Review(s)  

PK-TWBMT2AD
Price: $99.45

Availability: In Stock

Select Flex
Select RH Loft
Add to list...
Compare product with:
Loft Lie Weight Volume Face Angle Face Height
9.5° 58° 200 g 460 cc Adjustable 57 mm
10.5° 58° 200 g 460 cc Adjustable 57 mm
12º 58º 200 g 460 cc Adjustable 57 mm

Left Hand: 9.5º, 10.5°, 12° Bulge/Roll: 10"/9"
Breadth: 114 mm Hosel Bore: 0.335"
Finish: Blue Material: Forged 6AL-4V Titanium
  • Finally a titanium driver with adjustable hosel at an affordable price. Hosel sleeve has a triple function.
  • Change Face Angle: Adjustable hosel design allows you to adjust the face angle from 2º open to neutral to 2º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact.
  • Change Lie Angle: The adjustable hosel allows you to change the lie angle from 58º to 57º (i.e. 1º flat).
  • Exchange Shaft: The hosel design also allows you to exchange the shaft and play the driver with another shaft.
  • Choose from two ways to position the moveable weights to promote a neutral/straight flight or a distance enhancing draw. Each driver head comes standard with 1 x 10 gram and 2 x 2 gram weight screws. Move the heavier weight screw toward the heel to promote a draw, or move towards the toe to promote fade bias.
  • Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance.
  • The BMT-2's low, forward Center of Gravity promotes high launch, fast ball speed, and low spin for increased distance. The CG location is moved forward and low behind the face due to the three metal weight screws (total 14 gram). Moving the CG forward promotes more ball speed, high launch and less spin resulting in increased distance. The expanded front-to-back dimension (114 mm) increases stability at impact and forgiveness of off-center hits.
  • This self-contained Component Kit includes the following supplies:
    • 1 x BMT2 Adjustable Titanium driver head;
    • 1 x SynTech Accuforce-70 100% graphite driver shaft;
    • 1 x Rexton Velvet grip;
    • 1 x Ferrule (black);
    • 1 x Vise clamp;
    • 1 x Grip tape strip;
    • 1 x Quick epoxy Double Bubble, good for up to 2 clubs).
    • Grip solvent not included. Paint thinner available at hardware store.
: *
: *
: *
 
There have been no reviews for this product.


*
*
 
*
Type the characters you see in the picture:


*
Description
Loft Lie Weight Volume Face Angle Face Height
9.5° 58° 200 g 460 cc Adjustable 57 mm
10.5° 58° 200 g 460 cc Adjustable 57 mm
12º 58º 200 g 460 cc Adjustable 57 mm

Left Hand: 9.5º, 10.5°, 12° Bulge/Roll: 10"/9"
Breadth: 114 mm Hosel Bore: 0.335"
Finish: Blue Material: Forged 6AL-4V Titanium
  • Finally a titanium driver with adjustable hosel at an affordable price. Hosel sleeve has a triple function.
  • Change Face Angle: Adjustable hosel design allows you to adjust the face angle from 2º open to neutral to 2º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact.
  • Change Lie Angle: The adjustable hosel allows you to change the lie angle from 58º to 57º (i.e. 1º flat).
  • Exchange Shaft: The hosel design also allows you to exchange the shaft and play the driver with another shaft.
  • Choose from two ways to position the moveable weights to promote a neutral/straight flight or a distance enhancing draw. Each driver head comes standard with 1 x 10 gram and 2 x 2 gram weight screws. Move the heavier weight screw toward the heel to promote a draw, or move towards the toe to promote fade bias.
  • Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance.
  • The BMT-2's low, forward Center of Gravity promotes high launch, fast ball speed, and low spin for increased distance. The CG location is moved forward and low behind the face due to the three metal weight screws (total 14 gram). Moving the CG forward promotes more ball speed, high launch and less spin resulting in increased distance. The expanded front-to-back dimension (114 mm) increases stability at impact and forgiveness of off-center hits.
  • This self-contained Component Kit includes the following supplies:
    • 1 x BMT2 Adjustable Titanium driver head;
    • 1 x SynTech Accuforce-70 100% graphite driver shaft;
    • 1 x Rexton Velvet grip;
    • 1 x Ferrule (black);
    • 1 x Vise clamp;
    • 1 x Grip tape strip;
    • 1 x Quick epoxy Double Bubble, good for up to 2 clubs).
    • Grip solvent not included. Paint thinner available at hardware store.
Send to friend
: *
: *
: *
 
Customer feedback
There have been no reviews for this product.


Product Questions
*
*
 
*
Type the characters you see in the picture:


*