(0)
Home :: Golf Components :: Clubheads :: Golf Clubmaking Kits :: Driver Kits (Head, Shaft, Grip) :: Integra i-Win Titanium Driver Component Kit

Integra i-Win Titanium Driver Component Kit

Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit Integra i-Win Titanium Driver Component Kit
Integra i-Win Titanium Driver Component Kit
 
(0 reviews)  

Price: $69.95
SKU: PK-TWINTIW
Select Flex
Select RH Loft
Quantity
Loft Lie Weight Volume Face Angle Face Height
9.5° 58° 200 g 460 cc 1° closed 55 mm
10.5° 58° 200 g 460 cc 1° closed 55 mm
12º 58º 200 g 460 cc 1° closed 55 mm

Left Hand: 9.5º, 10.5°, 12° Bulge/Roll:  
Breadth: 112 mm Hosel Bore: 0.335"
Finish: Black Material: Forged 6AL-4V Titanium
  • The new i-Win let you adjust the vertical Center of Gravity through a moveable weight in the center of the head.
  • Each head comes with a set of two screws: 11-gram flat and wide metal screw and a 40 mm long brass screw weighing 9 gram.
  • Inserting the short screw with heavy end down will push the CG lower in the head & creates a lower-spinning driver. The lower CG position also lowers the launch angle by about 1º.
  • Inserting the long brass screw will raise the head's CG and offers additonal forgiveness for shots high on the face and creates a driver with intermediate spin. Shots hit higher on the face also loose less ball speed than when compared to shots high on the face with the heavy weight in the low position.
  • Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance.
  • Looking confidence-inspiring at address, i-Win has a slightly smaller footprint and a more traditional shape at address that better players find appealing.
  • This self-contained Component Kit includes the following supplies:
    • 1 x Integra i-Win Titanium driver head;
    • 1 x SynTech Accuforce-70 100% graphite driver shaft;
    • 1 x Rexton Velvet grip;
    • 1 x Ferrule (black);
    • 1 x Vise clamp;
    • 1 x Grip tape strip;
    • 1 x Quick epoxy Double Bubble, good for up to 2 clubs).
    • Grip solvent not included. Paint thinner available at hardware store.
Compare product with:
: *
: *
: *
 
Aldila Tour Green 75
$239.50
Cobra Graphite Design YS 60+ Taper Tip Graphite Iron Shafts
$13.95
Black Widow Finisher Jumbo Paddle Putter
$8.59
Acer XS Leggera Titanium Driver Head
$64.95
Pure Grips Undersize Pro Grey
$5.49
Green Ferrule 1/2", Pack of 10
$3.60
Custom-Built Integra Sooolong Hybrid
$30.95
Custom-Built Heater Blue Angels Hybrid
$29.95
There have been no reviews


You May Also Like

Integra Driver Headcover
$6.00
Grey-Black Driver Head Cover
$5.45
Red-Black Driver Head Cover
$5.45
Integra i-Win Titanium Driver Head
$54.98
Custom-Built Integra i-Win Titanium Driver
$66.95