Heater BMT Iron Set Component Kit

 
0 Review(s)  

PK-I1340-Set
Price: $99.90

Availability: In Stock

Select Flex
Select RH
Add to list...
Compare product with:
Iron 3 4 5 6 7 8 9 PW AW SW LW
Loft 19° 21° 24° 27° 31° 35° 40° 45° 50° 55° 60°
Lie 60.25° 61° 61.75° 62.5° 63° 63.5° 64° 64.5° 64.5° 64.5° 65°
Weight 245 252 259 266 272 280 287 300 305 305 305
Offset 6.5 6.1 5.7 5.3 4.6 3.7 2.8 2 1.5 1 1
Bounce 10° 11° 12° 12°

 

Right Hand: #3 - PW, SW, AW, LW Hosel Bore: 0.370"
Material: 431 Stainless Finish: Mirror Polish
Toe Height: 56 mm (#5 I) Sole Width: 21 mm (#5 I)
  • The new Heater BMT irons are the true blend of the feel the pros demand and the explosive distance amateurs crave.
  • #3 to #7 Irons: Deep cavity back design. The face thickness has been reduced and distrectionary weight strategically relocated deep and low for a lower Center of Gravity. The lower and center CG location promotes a higher launch angle, higher peak trajectory and a steep and soft-landing descent angle. The deep cavity design promotes stability at impact and forgiveness on off-center hits.
  • #8 to #PW Irons: Deep cavity design. A conventional face thickness increases accuracy on approach shots.
  • Wedges: AW, SW and LW are muscle back design promoting workability and deliver ball control and predicable trajectory.
  • Self-contained Component Kit includes the following supplies:
    • 7 x Heater BMT Iron heads, precision cast 431 stainless steel;
    • 7 x Apollo standard stepped steel shafts;
    • 7 x Rexton Red Velvet grips (Mens standard size);
    • 7 x Ferrules (black);
    • 1 x Vise clamp;
    • 7 x Grip tape strips (solvent based);
    • 4 x Quick epoxy Double Bubble, good for up to 8 clubs;
    • Grip solvent not included. Paint thinner available at your hardware store.
: *
: *
: *
 
There have been no reviews for this product.


*
*
 
*
Type the characters you see in the picture:


*
Description
Iron 3 4 5 6 7 8 9 PW AW SW LW
Loft 19° 21° 24° 27° 31° 35° 40° 45° 50° 55° 60°
Lie 60.25° 61° 61.75° 62.5° 63° 63.5° 64° 64.5° 64.5° 64.5° 65°
Weight 245 252 259 266 272 280 287 300 305 305 305
Offset 6.5 6.1 5.7 5.3 4.6 3.7 2.8 2 1.5 1 1
Bounce 10° 11° 12° 12°

 

Right Hand: #3 - PW, SW, AW, LW Hosel Bore: 0.370"
Material: 431 Stainless Finish: Mirror Polish
Toe Height: 56 mm (#5 I) Sole Width: 21 mm (#5 I)
  • The new Heater BMT irons are the true blend of the feel the pros demand and the explosive distance amateurs crave.
  • #3 to #7 Irons: Deep cavity back design. The face thickness has been reduced and distrectionary weight strategically relocated deep and low for a lower Center of Gravity. The lower and center CG location promotes a higher launch angle, higher peak trajectory and a steep and soft-landing descent angle. The deep cavity design promotes stability at impact and forgiveness on off-center hits.
  • #8 to #PW Irons: Deep cavity design. A conventional face thickness increases accuracy on approach shots.
  • Wedges: AW, SW and LW are muscle back design promoting workability and deliver ball control and predicable trajectory.
  • Self-contained Component Kit includes the following supplies:
    • 7 x Heater BMT Iron heads, precision cast 431 stainless steel;
    • 7 x Apollo standard stepped steel shafts;
    • 7 x Rexton Red Velvet grips (Mens standard size);
    • 7 x Ferrules (black);
    • 1 x Vise clamp;
    • 7 x Grip tape strips (solvent based);
    • 4 x Quick epoxy Double Bubble, good for up to 8 clubs;
    • Grip solvent not included. Paint thinner available at your hardware store.
Send to friend
: *
: *
: *
 
Customer feedback
There have been no reviews for this product.


Product Questions
*
*
 
*
Type the characters you see in the picture:


*