iDrive Tour Lite Graphite Shafts
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
iDrive Tour Lite Graphite Shafts
- The Tour Lite is 10 grams lighter than the standard iDrive shafts.
- The light weight Tour Lite promotes higher club head speed for more distance. Designed for golfers with smooth to average swing speed seeking extra distance.
- Unlike conventional graphite shafts i-Drive graphite shafts are filament wound, not table rolled.
- High modulus material is filament wound around a special forming mandrel. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- Guaranteed 100% high modulus, high strength graphite.
- Popular shafts are mid low flex point and low to mid torque for all level golfers.
- Bend Point: Mid
- Ball Flight: Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2.5"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2.5"
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.5"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.5"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.5"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.5"
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.5° | 0.335" | 0.600" | 46" | 58 g | Mid | |||||
| Wood | R/S | 4.1° | 0.335" | 0.600" | 46" | 62 g | Mid | |||||
| Iron | A/L | 4.1° | 0.370" | 0.600" | 41" | 61 g | Mid | |||||
| Iron | R/S | 3.1° | 0.370" | 0.600" | 41" | 64 g | Mid | |||||
Description
iDrive Tour Lite Graphite Shafts
- The Tour Lite is 10 grams lighter than the standard iDrive shafts.
- The light weight Tour Lite promotes higher club head speed for more distance. Designed for golfers with smooth to average swing speed seeking extra distance.
- Unlike conventional graphite shafts i-Drive graphite shafts are filament wound, not table rolled.
- High modulus material is filament wound around a special forming mandrel. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- Guaranteed 100% high modulus, high strength graphite.
- Popular shafts are mid low flex point and low to mid torque for all level golfers.
- Bend Point: Mid
- Ball Flight: Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2.5"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2.5"
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.5"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.5"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.5"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.5"
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.5° | 0.335" | 0.600" | 46" | 58 g | Mid | |||||
| Wood | R/S | 4.1° | 0.335" | 0.600" | 46" | 62 g | Mid | |||||
| Iron | A/L | 4.1° | 0.370" | 0.600" | 41" | 61 g | Mid | |||||
| Iron | R/S | 3.1° | 0.370" | 0.600" | 41" | 64 g | Mid | |||||
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Thomas Chick on Jul 22, 2020
A
iDrive Tour Lite, yes you need to do tip trim. Tip trim chart is available on that webpage, click on tab "Description"
Answered by Monark Golf Admin on Aug 3, 2020
Q
Do you find this helpful? YES NO
Asked by Ed on Nov 13, 2021
A
the printed shaft logo will not show the flex, i.e. all flexes share the same logo. there is a sticker attached to the butt end of shaft showing the flex.
Answered by Monark Golf Admin on Dec 11, 2021
See all 6 questions for this product
Was the above review useful to you? 
