MCS 75 Blue Graphite Iron Shafts
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
MCS 75 Blue Graphite Iron Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | A/L | 3.9° | 0.370" | 0.600" | 41" | 71 g | Mid | |||||
| Iron | R/S | 3.0° | 0.370" | 0.600" | 41" | 71 g | Low-Mid | |||||
Description
MCS 75 Blue Graphite Iron Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | A/L | 3.9° | 0.370" | 0.600" | 41" | 71 g | Mid | |||||
| Iron | R/S | 3.0° | 0.370" | 0.600" | 41" | 71 g | Low-Mid | |||||
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Ernest O Schmeisser on Jan 7, 2020
A
the tip trim chart is available online at the webpage of these shafts. Simply click on the tab "Description" at the end of the webpage.
Answered by Monark Golf Admin on Jan 8, 2020
Was the above review useful to you? 
