Custom-Built Heater B7 Insert Face Driving Irons
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Custom-Built Heater B7 Insert Face Driving Irons
- The new Heater B-7 Utility Iron is engineered for the distance and forgiveness of Fairway Wood/Hybrid but in the profile of an iron-like design. The hollow body design utilizes multi-piece construction and an ultra-thin 17-4 stainless steel face to achieve more ball speed off the tee or from the fairway. The Heater B-7 also incorporates a low and deep center of gravity which improves playability and performance for golfers of all skill levels!
- Hollow Body Technology: Weight is moved away from the face increasing MOI for more forgiveness. The lower CG promotes a higher launch angle for more distance
- The insert face is made from 17-4 Steel that is harder than standard 431 stainless steel. The harder material allows for an ultra-thin face promoting more face flexing for increased ball speed and more distance.
- The Center of Gravity is strategically moved low and deep to increase MOI and improve forgiveness on off-center hits. The low CG also promotes a higher launch angle for more distance at less efforts.
- Iron body is constructed of 431 stainless steel and face is forged from special heat-treated 17-4 stainless.
- Bevelled sole improves turf interaction.
- Brush Satin finish prevents unwanted glaring.
- Please allow 3 business days for club building.
| No. | Loft | Lie | Weight | Offset | Bounce | Club Length | |||
|
|
|||||||||
| #2 | 18° | 59.5° | 235 g | 3.8 mm | 2.3 | 39.5" | |||
| #3 | 21° | 60° | 242 g | 3.8 mm | 2.3 | 39" | |||
| Right Hand: | #2, #3 | Hosel: | 0.370" |
| Face: | 17-4 Stainless Steel | Body: | 431 Stainless Steel |
| Finish: | Brush Satin | Face Angle: | Square |
| Toe Height: | 47 mm (#3I) | Sole Width: | 30 mm (#3I) |
Description
Custom-Built Heater B7 Insert Face Driving Irons
- The new Heater B-7 Utility Iron is engineered for the distance and forgiveness of Fairway Wood/Hybrid but in the profile of an iron-like design. The hollow body design utilizes multi-piece construction and an ultra-thin 17-4 stainless steel face to achieve more ball speed off the tee or from the fairway. The Heater B-7 also incorporates a low and deep center of gravity which improves playability and performance for golfers of all skill levels!
- Hollow Body Technology: Weight is moved away from the face increasing MOI for more forgiveness. The lower CG promotes a higher launch angle for more distance
- The insert face is made from 17-4 Steel that is harder than standard 431 stainless steel. The harder material allows for an ultra-thin face promoting more face flexing for increased ball speed and more distance.
- The Center of Gravity is strategically moved low and deep to increase MOI and improve forgiveness on off-center hits. The low CG also promotes a higher launch angle for more distance at less efforts.
- Iron body is constructed of 431 stainless steel and face is forged from special heat-treated 17-4 stainless.
- Bevelled sole improves turf interaction.
- Brush Satin finish prevents unwanted glaring.
- Please allow 3 business days for club building.
Specification
| No. | Loft | Lie | Weight | Offset | Bounce | Club Length | |||
|
|
|||||||||
| #2 | 18° | 59.5° | 235 g | 3.8 mm | 2.3 | 39.5" | |||
| #3 | 21° | 60° | 242 g | 3.8 mm | 2.3 | 39" | |||
| Right Hand: | #2, #3 | Hosel: | 0.370" |
| Face: | 17-4 Stainless Steel | Body: | 431 Stainless Steel |
| Finish: | Brush Satin | Face Angle: | Square |
| Toe Height: | 47 mm (#3I) | Sole Width: | 30 mm (#3I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Tom on May 27, 2023
A
none of these club heads are submitted to the USGA for testing. there is no confirmation letter from the USGA for any of these heads.
Answered by Monark Golf Admin on May 31, 2023
Customer feedback
Reviews
Was the above review useful to you? You May Also Like
Custom-Built Heater B-7 Iron Set
$198.95
