Custom-Built Integra Sooolong II Bi-Face Titanium Driver
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Custom-Built Integra Sooolong II Bi-Face Titanium Driver
- The Sooolong Bi-Face driver incorporates the latest technology to produce maximum distance.
- The club face has two layers, each face is only 1.6 mm thin and constructed of super strong heat treated SP-970 Beta Titanium. The two faces are separated by a gap of 1 mm. When the golf ball strikes the face, the air trapped between the two layers is compressed and the air pressure increases. This causes the second face to rebound resulting in a stronger rebound wave forward between the layers.
- The benefit are increased energy transfer into the ball and maximum distance off the tee.
- This innovative face design is a great choice for golfers looking for additional distance.
- The deep face and enlarged sweet spot boost confidence at address position.
- The face is forged from extra strong heat treated 15-3-3-3 Beta Titanium, allowing for an thinner face. A thinner face increases trempoline effect for increased distance.
- Exceeds the COR/CT limitations set by USGA and does not conform to USGA rules.
- Please allow 3 business days for club building.
| Loft | Lie | Weight | Volume | Face Angle | Face Height | |||||
|
|
||||||||||
| 7.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 9.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 10.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 12º | 56º | 200 g | 450 cc | 1° closed | 62 mm | |||||
| Right Hand: | 7.5º - 12° | Bulge/Roll: | 10"/10" |
| Finish: | Red | Hosel: | 0.335" |
| Body Material: | 15-3-3-3 Beta Titan | Face Material: | SP-700 Beta Titanium |
Description
Custom-Built Integra Sooolong II Bi-Face Titanium Driver
- The Sooolong Bi-Face driver incorporates the latest technology to produce maximum distance.
- The club face has two layers, each face is only 1.6 mm thin and constructed of super strong heat treated SP-970 Beta Titanium. The two faces are separated by a gap of 1 mm. When the golf ball strikes the face, the air trapped between the two layers is compressed and the air pressure increases. This causes the second face to rebound resulting in a stronger rebound wave forward between the layers.
- The benefit are increased energy transfer into the ball and maximum distance off the tee.
- This innovative face design is a great choice for golfers looking for additional distance.
- The deep face and enlarged sweet spot boost confidence at address position.
- The face is forged from extra strong heat treated 15-3-3-3 Beta Titanium, allowing for an thinner face. A thinner face increases trempoline effect for increased distance.
- Exceeds the COR/CT limitations set by USGA and does not conform to USGA rules.
- Please allow 3 business days for club building.
Specification
| Loft | Lie | Weight | Volume | Face Angle | Face Height | |||||
|
|
||||||||||
| 7.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 9.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 10.5° | 56° | 200 g | 450 cc | 1° closed | 62 mm | |||||
| 12º | 56º | 200 g | 450 cc | 1° closed | 62 mm | |||||
| Right Hand: | 7.5º - 12° | Bulge/Roll: | 10"/10" |
| Finish: | Red | Hosel: | 0.335" |
| Body Material: | 15-3-3-3 Beta Titan | Face Material: | SP-700 Beta Titanium |
Product Q&A
Have a question? Need more information? Ask our community.
Was the above review useful to you? 
