Custom-Built King EP Cup Face Titanium Driver

Add your own review
CF-TW-KGEP
Price: $76.95

Availability: In Stock

CF Loft
CF Flex
CF Shaft
View Available Shaft Upgrade
CF Grip Size
CF Grip
View Available Grip Upgrade
CF Length
CF Head Cover
CF_Ferrule
Upgrade Total: $0.00
Subtotal: $0.00
Add to list...
Compare product with:

Custom-Built King EP Cup Face Titanium Driver

  • Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Conventional driver heads have a tig welding line behind the face, our innovative cup face design allows for welding on the body shell. This technique reduces the risk of cracks and makes the face thinner and wider promoting faster ball speed and more distance.
  • Enlarged Sweet Spot: In order to make the King EP driver both long and forgiving, it was built with technologies that protect both ball speed and create a massive sweet spot. The King EP is engineered with a high MOI design to produce maximum forgiveness and speed across the face.
  • Aerodynamic Profile: A raised crown, a low skirt and a low tail promote a smooth airflow from the leading edge to the tail, to reduce drag and increase club speed.
  • Low Center of Gravity: The expanded head profile and low tail with low skirt move the CG low and deep, promoting an more efficient energy transfer to the ball for an optimized launch.
  • The Expanded face-to-back distance of 116 mm increases the MOI, i.e. resistance to twisting, improves stability and increases forgiveness for more distance even on off-center shots.
  • Please allow 3 business days for club building.
Loft Lie Wgt. Vol. Angle Face Height
9.5° 57° 198 g 460 cc 1º Close 54 mm
10.5° 57° 198 g 460 cc 1º Close 54 mm
12° 57° 198 g 460 cc 1º Close 54 mm

 

Right Hand: 9.5° - 12° Material: Forged 6AL4V Titanium
Finish: Black Hosel Bore: 0.335"
Driver Breadth: 116 mm Bulge/Roll: 11 / 10
: *
: *
: *
 
There have been no reviews for this product.


Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by John on Oct 30, 2019
A
King EP driver head features a weight screw at the rear end. however this is not a sliding weight. Factory does not make replacement weight screws. if you like to a draw bias or fade bias, you can apply lead tape outside the head. Lead tape is available online at "Tools and Supplies", item number LT.
Answered by Monark Golf Admin on Nov 4, 2019


Description

Custom-Built King EP Cup Face Titanium Driver

  • Cup face design enlarges the effective face area and sweet spot. The benefit is increased rebound effect for more distance. Conventional driver heads have a tig welding line behind the face, our innovative cup face design allows for welding on the body shell. This technique reduces the risk of cracks and makes the face thinner and wider promoting faster ball speed and more distance.
  • Enlarged Sweet Spot: In order to make the King EP driver both long and forgiving, it was built with technologies that protect both ball speed and create a massive sweet spot. The King EP is engineered with a high MOI design to produce maximum forgiveness and speed across the face.
  • Aerodynamic Profile: A raised crown, a low skirt and a low tail promote a smooth airflow from the leading edge to the tail, to reduce drag and increase club speed.
  • Low Center of Gravity: The expanded head profile and low tail with low skirt move the CG low and deep, promoting an more efficient energy transfer to the ball for an optimized launch.
  • The Expanded face-to-back distance of 116 mm increases the MOI, i.e. resistance to twisting, improves stability and increases forgiveness for more distance even on off-center shots.
  • Please allow 3 business days for club building.
Specification
Loft Lie Wgt. Vol. Angle Face Height
9.5° 57° 198 g 460 cc 1º Close 54 mm
10.5° 57° 198 g 460 cc 1º Close 54 mm
12° 57° 198 g 460 cc 1º Close 54 mm

 

Right Hand: 9.5° - 12° Material: Forged 6AL4V Titanium
Finish: Black Hosel Bore: 0.335"
Driver Breadth: 116 mm Bulge/Roll: 11 / 10
Send to friend
: *
: *
: *
 
Customer feedback
There have been no reviews for this product.


Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by John on Oct 30, 2019
A
King EP driver head features a weight screw at the rear end. however this is not a sliding weight. Factory does not make replacement weight screws. if you like to a draw bias or fade bias, you can apply lead tape outside the head. Lead tape is available online at "Tools and Supplies", item number LT.
Answered by Monark Golf Admin on Nov 4, 2019