Custom-Built T11 Power Back Iron Set
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Custom-Built T11 Power Back Iron Set
- Compare to TaylorMade® R11™
- New oversize irons designed with a deep undercut cavity and a recessed weight.
- Oversize head profile promotes increased forgiveness and confidence.
- The deep undercut cavity positions the Center of Gravity deep behind the face for a more solid feel on impact and greater consistency.
- The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots.
- Traditional look enhanced by the latest design technology.
- Please allow 3 business days for the club assembly.
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 20° | 23° | 26° | 29° | 33° | 37° | 41° | 46° | 50° | 55° | 60° | |
| Lie | 60° | 60.5° | 61° | 61.5° | 62° | 62.5° | 63° | 63.5° | 64° | 64° | 64° | |
| Weight | 246 | 253 | 260 | 267 | 274 | 281 | 288 | 297 | 300 | 304 | 304 | |
| Offset | 5.5 | 5 | 4.5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.3 | 1 | 1 | |
| Length | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.5" | 35.5" | |
| Left Hand: | #3 - PW, SW | Hosel: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror |
| Toe Height: | 58 mm (#5 I) | Sole Width: | 22 mm (#5 I) |
Was the above review useful to you? Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Mike on Mar 16, 2022
A
lie bending is avail online for Acer XV irons, i cannot provide lie bending for T11 irons. i will try to do 2 inch longer iron length. However some shafts are too short if you request Stiff flex. Stiff needs more tip trim and this makes a shaft shorter. Grafalloy Procustom graphite iron shafts are extra long. TrueTemper Dynamic Gold are single flex steel shafts.
Answered by Monark Golf Admin on Apr 1, 2022
Description
Custom-Built T11 Power Back Iron Set
- Compare to TaylorMade® R11™
- New oversize irons designed with a deep undercut cavity and a recessed weight.
- Oversize head profile promotes increased forgiveness and confidence.
- The deep undercut cavity positions the Center of Gravity deep behind the face for a more solid feel on impact and greater consistency.
- The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots.
- Traditional look enhanced by the latest design technology.
- Please allow 3 business days for the club assembly.
Specification
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 20° | 23° | 26° | 29° | 33° | 37° | 41° | 46° | 50° | 55° | 60° | |
| Lie | 60° | 60.5° | 61° | 61.5° | 62° | 62.5° | 63° | 63.5° | 64° | 64° | 64° | |
| Weight | 246 | 253 | 260 | 267 | 274 | 281 | 288 | 297 | 300 | 304 | 304 | |
| Offset | 5.5 | 5 | 4.5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.3 | 1 | 1 | |
| Length | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.5" | 35.5" | |
| Left Hand: | #3 - PW, SW | Hosel: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror |
| Toe Height: | 58 mm (#5 I) | Sole Width: | 22 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Mike on Mar 16, 2022
A
lie bending is avail online for Acer XV irons, i cannot provide lie bending for T11 irons. i will try to do 2 inch longer iron length. However some shafts are too short if you request Stiff flex. Stiff needs more tip trim and this makes a shaft shorter. Grafalloy Procustom graphite iron shafts are extra long. TrueTemper Dynamic Gold are single flex steel shafts.
Answered by Monark Golf Admin on Apr 1, 2022
