Aerotech Powercoil HP50 Wood Shaft + Adapter & Grip

Add your own review
CS-GAT-PC50
Price: $67.95

Availability: In Stock

CF Flex
CF Tip Installed
View Available Adapters
CF Grip Size
CF Grip
View Available Grip Upgrade
CF Shaft Length
CF Club
Upgrade Total: $0.00
Subtotal: $0.00
Add to list...
Compare product with:

Aerotech Powercoil HP50 Wood Shaft + Adapter & Grip

  • The Power Coil has been improved by optimizing the torsional profile (the amount the shaft twists at different locations along its length) in each flex so there is a Power Coil shaft for every golfer.
  • One of the best ultralight weight wood shaft values on the market. The Powercoil HP50 weighs in at just over 50-grams with a torque that is envious of even some of the highest priced ultralight shafts on the market. The shaft is designed so the softer flexes have progressively softer tips to help the slower swing speed players optimize launch conditions.
  • This Power Coil 50 shaft is designed with a high modulus carbon fiber surface layer oriented in a spiral direction down the shaft for more uniform bending properties during the swing. The neutral "hoop wind" virtually eliminates the oscillation of the head resulting in more consistent contact and reduced shot dispersion. The Power Coil surface layer is oriented in a direction that allows it to load in tension while the club is being twisted during the swing. This imparts a tightening of the outer fibers for a more efficient energy transfer to the ball and greater distance.
  • Bend Point: Low (A), Mid (R, S)
  • Ball Flight:  High (A), Mid (R, S)
  • Swing Speed: 65-75 mph (A), 80-90 mph (R), 90-100 mph (S)
  • Measure Shaft Length: Please measure the length of your current shaft (not club length) as we don't have your shaft in our store.
    • Remove shaft from your club length.
    • Remove the screw or bolt from hosel adapter
    • Measure length of your current shaft, measure length from tip end of adapter to the butt end of grip
    • Write the desired shaft length of your new shaft into the field "Shaft Length"
  • This is a built-to-order assembled shaft + adapter + grip item. Please allow 3 business days for the shaft installation.
  • Your new shaft is trimmed to your specification. Order cannot be cancelled once assembly has begun. No return allowed, sales are final.
  • Please allow +/- 1/4 inch tolerance between new and old shaft; it is not considered a defect. 
Shaft Flex Torque Tip Butt Length Weight Flight
Wood 0.335 A 5.2° 0.335" 0.580" 47" 51 g High
Wood 0.335 R 4.6° 0.335" 0.600" 46" 51 g Mid
Wood 0.335 S 4.2° 0.335" 0.600" 46" 51 g Mid
: *
: *
: *
 
There have been no reviews for this product.


Have a question? Need more information? Ask our community.
Description

Aerotech Powercoil HP50 Wood Shaft + Adapter & Grip

  • The Power Coil has been improved by optimizing the torsional profile (the amount the shaft twists at different locations along its length) in each flex so there is a Power Coil shaft for every golfer.
  • One of the best ultralight weight wood shaft values on the market. The Powercoil HP50 weighs in at just over 50-grams with a torque that is envious of even some of the highest priced ultralight shafts on the market. The shaft is designed so the softer flexes have progressively softer tips to help the slower swing speed players optimize launch conditions.
  • This Power Coil 50 shaft is designed with a high modulus carbon fiber surface layer oriented in a spiral direction down the shaft for more uniform bending properties during the swing. The neutral "hoop wind" virtually eliminates the oscillation of the head resulting in more consistent contact and reduced shot dispersion. The Power Coil surface layer is oriented in a direction that allows it to load in tension while the club is being twisted during the swing. This imparts a tightening of the outer fibers for a more efficient energy transfer to the ball and greater distance.
  • Bend Point: Low (A), Mid (R, S)
  • Ball Flight:  High (A), Mid (R, S)
  • Swing Speed: 65-75 mph (A), 80-90 mph (R), 90-100 mph (S)
  • Measure Shaft Length: Please measure the length of your current shaft (not club length) as we don't have your shaft in our store.
    • Remove shaft from your club length.
    • Remove the screw or bolt from hosel adapter
    • Measure length of your current shaft, measure length from tip end of adapter to the butt end of grip
    • Write the desired shaft length of your new shaft into the field "Shaft Length"
  • This is a built-to-order assembled shaft + adapter + grip item. Please allow 3 business days for the shaft installation.
  • Your new shaft is trimmed to your specification. Order cannot be cancelled once assembly has begun. No return allowed, sales are final.
  • Please allow +/- 1/4 inch tolerance between new and old shaft; it is not considered a defect. 
Specification
Shaft Flex Torque Tip Butt Length Weight Flight
Wood 0.335 A 5.2° 0.335" 0.580" 47" 51 g High
Wood 0.335 R 4.6° 0.335" 0.600" 46" 51 g Mid
Wood 0.335 S 4.2° 0.335" 0.600" 46" 51 g Mid
Send to friend
: *
: *
: *
 
Customer feedback
There have been no reviews for this product.


Product Q&A
Have a question? Need more information? Ask our community.