Heater 3.0 Black Plated Iron Head RH
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Heater 3.0 Black Plated Iron Head RH
- Compare to Taylor Made® Burner 2.0™
- The deep undercut cavity positions the Center of Gravity deep behind the face for a more solid feel on impact and greater consistency. Consistent C.G. locations for optimized ball flight in long-, mid- and short-irons.
- The oversized face and wider sole promote confidence at address. Multi-Functional sole design for reduced turf-drag and advanced playability
- The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots.
- The luxurious black PVD plating bestows a one-of-a-kind appearance.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 19° | 21° | 24° | 27° | 31° | 35° | 40° | 45° | 50° | 55° | 60° | |
| Lie | 60.5° | 61° | 61.5° | 62.5° | 63° | 63.5° | 64° | 64.5° | 64.5° | 64.5° | 64.5° | |
| Weight | 245 | 252 | 259 | 266 | 272 | 280 | 287 | 297 | 301 | 305 | 305 | |
| Offset | 6.5 | 6.1 | 5.7 | 5.3 | 4.6 | 3.7 | 2.8 | 2 | 1.5 | 1 | 1 | |
| Right Hand: | #3 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Black electron-plated |
| Toe Height: | 58 mm (#5 I) | Sole Width: | 22 mm (#5 I) |
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
Heater 3.0 Black Plated Iron Head RH
- Compare to Taylor Made® Burner 2.0™
- The deep undercut cavity positions the Center of Gravity deep behind the face for a more solid feel on impact and greater consistency. Consistent C.G. locations for optimized ball flight in long-, mid- and short-irons.
- The oversized face and wider sole promote confidence at address. Multi-Functional sole design for reduced turf-drag and advanced playability
- The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots.
- The luxurious black PVD plating bestows a one-of-a-kind appearance.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 19° | 21° | 24° | 27° | 31° | 35° | 40° | 45° | 50° | 55° | 60° | |
| Lie | 60.5° | 61° | 61.5° | 62.5° | 63° | 63.5° | 64° | 64.5° | 64.5° | 64.5° | 64.5° | |
| Weight | 245 | 252 | 259 | 266 | 272 | 280 | 287 | 297 | 301 | 305 | 305 | |
| Offset | 6.5 | 6.1 | 5.7 | 5.3 | 4.6 | 3.7 | 2.8 | 2 | 1.5 | 1 | 1 | |
| Right Hand: | #3 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Black electron-plated |
| Toe Height: | 58 mm (#5 I) | Sole Width: | 22 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
