Mondeo Jet Black Adjustable Maraging Fairway Wood Head
Compare product with:
$8.45 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Mondeo Jet Black Adjustable Maraging Fairway Wood Head
- SPECIAL OFFER GOOD TILL JUNE 21
- Finally Adjustable Hosel design for a fairway wood at an affordable price. The new Mondeo Jet Black fairway wood is the only fairway wood component head on the market featuring an adjustable hosel sleeve.
- The recessed Recoil Pocket along the hitting face makes the hitting face more responsive and increases the size of the sweet spot. The benefits are a reduced spin for longer shots and increased forgiveness on off-center hits.
- S450 Maraging Steel: Mondeo Jet Black wood heads are entirely (body and sole plate) cast from heat treated, strong S450 Maraging Steel. The harder steel alloy allows for a thinner wall, improves accuracy and increases face flexing. Maraging steel is a low-carbon steel alloy with a higher nickel content undergoing extended time of heat treatment. Maraging steel is an ultra-high-strength steel class deriving it's strength from precipitation of intermetallic compounds.
- Adjustable Hosel Sleeve: Face Angle is adjustable to prevent a hook or slice for long & straight shots. Adjustable hosel design allows you to adjust the face angle from 1.5º open to neutral to 1.5º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. The adjustable hosel allows you to change the lie angle from 57º to 56º (i.e. 1º upright).
- - 1.5º Face Angle promotes a distance enhancing draw bias
- 0º (Square) Face Angle
- +1.5º Face Angle promotes a fade bias
- 1º Upright Lie at Square Face
- The hosel sleeve also allows you to exchange shafts and to play with different shafts.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- Black PVD Finish: Electron plated PVD finish reduces unwanted glaring and lends a high end image to these heads.
- Head comes with a complimentory wrench, 1 x pre-installed shaft adapter and a special ferrule.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Wood | Loft | Lie | Weight | Volume | Std Length | ||||
|
|
|||||||||
| #3 | 15° | 58.5° | 210 g | 165 cc | 43" | ||||
| #5 | 19° | 59° | 218 g | 160 cc | 42" | ||||
| Right Hand: | #3, #5 | Hosel: | 0.335" |
| Face Angle: | 0º | Material: | S450 Maraging Steel |
| Face Height: | 37 mm (#3W) | Face-Rear: | 81.5 mm (#3W) |
There have been no reviews for this product.
Only registered customers are allowed to add review. Please sign in and add your own review!
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Jimmy on Jun 21, 2020
A
the Mondeo adapter will fit only Mondeo Jet Black, it will not fit any TaylorMade. The Mondeo let you change the face angle and 1 setting of lie angle. it does not allow to change the loft angle
Answered by Monark Golf Admin on Jun 21, 2020
Q
Do you find this helpful? YES NO
Asked by Tony Haslam on Sep 6, 2019
A
fairway wood heads are usually cast from 17-4 stainless steel. Mondeo Jet Black wood heads are entirely cast from S450 Maraging Steel (not only the face, but the entire body). Maraging Steel is a special steel alloy undergoing a heat treatment. it makes the steel harder.
Answered by Monark Golf Admin on Sep 9, 2019
See all 4 questions for this product
Description
Mondeo Jet Black Adjustable Maraging Fairway Wood Head
- SPECIAL OFFER GOOD TILL JUNE 21
- Finally Adjustable Hosel design for a fairway wood at an affordable price. The new Mondeo Jet Black fairway wood is the only fairway wood component head on the market featuring an adjustable hosel sleeve.
- The recessed Recoil Pocket along the hitting face makes the hitting face more responsive and increases the size of the sweet spot. The benefits are a reduced spin for longer shots and increased forgiveness on off-center hits.
- S450 Maraging Steel: Mondeo Jet Black wood heads are entirely (body and sole plate) cast from heat treated, strong S450 Maraging Steel. The harder steel alloy allows for a thinner wall, improves accuracy and increases face flexing. Maraging steel is a low-carbon steel alloy with a higher nickel content undergoing extended time of heat treatment. Maraging steel is an ultra-high-strength steel class deriving it's strength from precipitation of intermetallic compounds.
- Adjustable Hosel Sleeve: Face Angle is adjustable to prevent a hook or slice for long & straight shots. Adjustable hosel design allows you to adjust the face angle from 1.5º open to neutral to 1.5º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. The adjustable hosel allows you to change the lie angle from 57º to 56º (i.e. 1º upright).
- - 1.5º Face Angle promotes a distance enhancing draw bias
- 0º (Square) Face Angle
- +1.5º Face Angle promotes a fade bias
- 1º Upright Lie at Square Face
- The hosel sleeve also allows you to exchange shafts and to play with different shafts.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- Black PVD Finish: Electron plated PVD finish reduces unwanted glaring and lends a high end image to these heads.
- Head comes with a complimentory wrench, 1 x pre-installed shaft adapter and a special ferrule.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Wood | Loft | Lie | Weight | Volume | Std Length | ||||
|
|
|||||||||
| #3 | 15° | 58.5° | 210 g | 165 cc | 43" | ||||
| #5 | 19° | 59° | 218 g | 160 cc | 42" | ||||
| Right Hand: | #3, #5 | Hosel: | 0.335" |
| Face Angle: | 0º | Material: | S450 Maraging Steel |
| Face Height: | 37 mm (#3W) | Face-Rear: | 81.5 mm (#3W) |
Customer feedback
There have been no reviews for this product.
Only registered customers are allowed to add review. Please sign in and add your own review!
Product Q&A
See all 4 questions for this product
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Jimmy on Jun 21, 2020
A
the Mondeo adapter will fit only Mondeo Jet Black, it will not fit any TaylorMade. The Mondeo let you change the face angle and 1 setting of lie angle. it does not allow to change the loft angle
Answered by Monark Golf Admin on Jun 21, 2020
Q
Do you find this helpful? YES NO
Asked by Tony Haslam on Sep 6, 2019
A
fairway wood heads are usually cast from 17-4 stainless steel. Mondeo Jet Black wood heads are entirely cast from S450 Maraging Steel (not only the face, but the entire body). Maraging Steel is a special steel alloy undergoing a heat treatment. it makes the steel harder.
Answered by Monark Golf Admin on Sep 9, 2019
See all 4 questions for this product
