Heater B-6 Hybrid Component Kit
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Heater B-6 Hybrid Component Kit
- Compare to TaylorMade® M6™
- Confidence-inspiring shape & technologies promote speed, distance & forgiveness
- The recessed Recoil Pocket along the hitting face make the hitting face more responsive and increases the size of the sweet spot. The benefits are a reduced spin for longer shots and increased forgiveness on off-center hits. The recoil zone promotes more distance and more consistent shots from any lie.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater B-6 Hybrid head RH;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip ;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| No. | Loft | Lie | Weight | Volume | Club Length | ||||
|
|
|||||||||
| #3 | 18° | 60° | 237 | 130 cc | 40" | ||||
| #4 | 21° | 60.5° | 244 | 125 cc | 39.5" | ||||
| #5 | 24° | 61° | 251 | 120 cc | 39" | ||||
| #6 | 27° | 61.5° | 258 | 120 cc | 38.5" | ||||
| Right Hand: | 18º - 27º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 36 mm (18º) | Face-Rear: | 59 mm (18º) |
Description
Heater B-6 Hybrid Component Kit
- Compare to TaylorMade® M6™
- Confidence-inspiring shape & technologies promote speed, distance & forgiveness
- The recessed Recoil Pocket along the hitting face make the hitting face more responsive and increases the size of the sweet spot. The benefits are a reduced spin for longer shots and increased forgiveness on off-center hits. The recoil zone promotes more distance and more consistent shots from any lie.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater B-6 Hybrid head RH;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip ;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| No. | Loft | Lie | Weight | Volume | Club Length | ||||
|
|
|||||||||
| #3 | 18° | 60° | 237 | 130 cc | 40" | ||||
| #4 | 21° | 60.5° | 244 | 125 cc | 39.5" | ||||
| #5 | 24° | 61° | 251 | 120 cc | 39" | ||||
| #6 | 27° | 61.5° | 258 | 120 cc | 38.5" | ||||
| Right Hand: | 18º - 27º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 36 mm (18º) | Face-Rear: | 59 mm (18º) |
Product Q&A
Have a question? Need more information? Ask our community.
Customer feedback
Reviews
There have been no reviews for this product.
