Heater BMT Hybrid Component Kit
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Heater BMT Hybrid Component Kit
- Compare to TaylorMade® RocketBallz Stage2™
- Recessed pockets on sole near club face increases ball speed and distance.
- Center of Gravity is moved low and forward for high launching shots and increased distance.
- Large, deep club face and high MOI head profile make it easy to launch.
- White crown makes alignment easy.
- 10 lofts available from 15º to 45º to fit any golfer.
- This self-contained Component Kit includes the following supplies
- 1 x Heater BMT Hybrid head;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| No. | Loft | Lie | Weight | Volume | Club Length | ||||
|
|
|||||||||
| #2 | 15° | 60° | 216 | 145 cc | 40.5" | ||||
| #3 | 18° | 60.5° | 221 | 140 cc | 40" | ||||
| #4 | 21° | 61° | 226 | 135 cc | 39.5" | ||||
| #5 | 24° | 61.5° | 232 | 135 cc | 39" | ||||
| #6 | 27° | 62° | 238 | 130 cc | 38.5" | ||||
| #7 | 30° | 62.5° | 244 | 130 cc | 38" | ||||
| #8 | 34° | 63° | 250 | 125 cc | 37.5" | ||||
| #9 | 38° | 63.5° | 256 | 125 cc | 37" | ||||
| PW | 42° | 64° | 262 | 120 cc | 36.5" | ||||
| SW | 45° | 64° | 268 | 120 cc | 36" | ||||
| Right Hand: | 15º - 43º | Hosel: | 0.370" |
| Finish: | White | Material: | 17-4 stainless steel |
| Face Height: | 35 mm (22º) | Breadth: | 68.5 mm (22º) |
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
Heater BMT Hybrid Component Kit
- Compare to TaylorMade® RocketBallz Stage2™
- Recessed pockets on sole near club face increases ball speed and distance.
- Center of Gravity is moved low and forward for high launching shots and increased distance.
- Large, deep club face and high MOI head profile make it easy to launch.
- White crown makes alignment easy.
- 10 lofts available from 15º to 45º to fit any golfer.
- This self-contained Component Kit includes the following supplies
- 1 x Heater BMT Hybrid head;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| No. | Loft | Lie | Weight | Volume | Club Length | ||||
|
|
|||||||||
| #2 | 15° | 60° | 216 | 145 cc | 40.5" | ||||
| #3 | 18° | 60.5° | 221 | 140 cc | 40" | ||||
| #4 | 21° | 61° | 226 | 135 cc | 39.5" | ||||
| #5 | 24° | 61.5° | 232 | 135 cc | 39" | ||||
| #6 | 27° | 62° | 238 | 130 cc | 38.5" | ||||
| #7 | 30° | 62.5° | 244 | 130 cc | 38" | ||||
| #8 | 34° | 63° | 250 | 125 cc | 37.5" | ||||
| #9 | 38° | 63.5° | 256 | 125 cc | 37" | ||||
| PW | 42° | 64° | 262 | 120 cc | 36.5" | ||||
| SW | 45° | 64° | 268 | 120 cc | 36" | ||||
| Right Hand: | 15º - 43º | Hosel: | 0.370" |
| Finish: | White | Material: | 17-4 stainless steel |
| Face Height: | 35 mm (22º) | Breadth: | 68.5 mm (22º) |
Product Q&A
Have a question? Need more information? Ask our community.
You May Also Like
Heater BMT Hybrid Head
$23.45
