King X-888 Hybrid Component Kit
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
King X-888 Hybrid Component Kit
- Compare to Callway® Rogue™
- New compact head shape for greater versatility, playability and confidence
- Progressive head shape that is both forgiving and appealing, packed with high MOI technology
- Weighted sole lowers the Center of Gravity making it easier to launch the ball high and long
- Dual rail sole optimizes turf interaction and reduces digging
- A raised crown, a low skirt and a low tail promote a smooth airflow from the leading edge to the tail and move the CG below the ball's equator for a higher trajectory
- Offset hosel helps square the clubface at impact
- Slightly deeper face improves confidence at address
- This self-contained Component Kit includes the following supplies:
- 1 x King X888 Hybrid head RH;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip ;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| No. | Loft | Lie | Weight | Volume | Offset | Club Length | |||
|
|
|||||||||
| #3 | 19° | 58° | 245 | 130 cc | -3.0 | 40" | |||
| #4 | 21° | 58.5° | 252 | 122 cc | -4.0 | 39.5" | |||
| #5 | 24° | 59° | 259 | 114 cc | -5.0 | 39" | |||
| #6 | 27° | 59.5° | 266 | 106 cc | -6.0 | 38.5" | |||
| Right Hand: | 19º - 27º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 37 mm (21º) | Face-Rear: | 58 mm (21º) |
Description
King X-888 Hybrid Component Kit
- Compare to Callway® Rogue™
- New compact head shape for greater versatility, playability and confidence
- Progressive head shape that is both forgiving and appealing, packed with high MOI technology
- Weighted sole lowers the Center of Gravity making it easier to launch the ball high and long
- Dual rail sole optimizes turf interaction and reduces digging
- A raised crown, a low skirt and a low tail promote a smooth airflow from the leading edge to the tail and move the CG below the ball's equator for a higher trajectory
- Offset hosel helps square the clubface at impact
- Slightly deeper face improves confidence at address
- This self-contained Component Kit includes the following supplies:
- 1 x King X888 Hybrid head RH;
- 1 x Syntec Accuforce 70HB Hybrid Graphite shaft;
- 1 x Rexton Velvet grip ;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| No. | Loft | Lie | Weight | Volume | Offset | Club Length | |||
|
|
|||||||||
| #3 | 19° | 58° | 245 | 130 cc | -3.0 | 40" | |||
| #4 | 21° | 58.5° | 252 | 122 cc | -4.0 | 39.5" | |||
| #5 | 24° | 59° | 259 | 114 cc | -5.0 | 39" | |||
| #6 | 27° | 59.5° | 266 | 106 cc | -6.0 | 38.5" | |||
| Right Hand: | 19º - 27º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 37 mm (21º) | Face-Rear: | 58 mm (21º) |
Product Q&A
Have a question? Need more information? Ask our community.
Was the above review useful to you? 
