Heater B-6 Iron Set Component Kit
$8.99 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Heater B-6 Iron Set Component Kit
- Compare to TaylorMade® M6™
- 360º Deep Undercut Cavity: The deep channel at sole promotes stability at impact and forgiveness on off-center hits. The undercut cavity expands the unsupported face area for more ball speed across the face. It also removes weight from the topline to create ultra-low Center of Gravity.
- The new steel bar over the cavity supports the top line and reduces unwanted vibrations
- New lower Center of Gravity placement promotes a high launhing, strong and penetrating ball flight.
- Self-contained Component Kit includes the following supplies:
- 7 x Iron heads, precision cast 431 stainless steel;
- 7 x Apollo standard stepped steel shafts;
- 7 x Rexton Velvet grips (Mens standard size);
- 7 x Ferrules (black);
- 1 x Vise clamp;
- 7 x Grip tape strips (solvent based);
- 4 x Quick epoxy Double Bubble, good for up to 8 clubs;
- Grip solvent not included. Paint thinner available at your hardware store.
| Iron | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | ||
|
|
||||||||||||
| Loft | 23° | 26° | 29° | 33° | 37° | 41° | 45° | 50° | 55° | 60° | ||
| Lie | 61° | 61.5° | 62° | 62.5° | 63° | 64° | 65° | 65° | 65° | 65° | ||
| Weight | 251 | 258 | 265 | 272 | 279 | 286 | 293 | 302 | 305 | 305 | ||
| Offset | 4.5 | 4.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 1.0 | 1.0 | 1.0 | ||
| Bounce | 1° | 1° | 2° | 3° | 4° | 5° | 7° | 11° | 11° | 11° | ||
| Length | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.25" | 35.25" | ||
| Right Hand: | #4 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror Polish |
| Toe Height: | 51 mm (#5 I) | Sole Width: | 23 mm (#5 I) |
Description
Heater B-6 Iron Set Component Kit
- Compare to TaylorMade® M6™
- 360º Deep Undercut Cavity: The deep channel at sole promotes stability at impact and forgiveness on off-center hits. The undercut cavity expands the unsupported face area for more ball speed across the face. It also removes weight from the topline to create ultra-low Center of Gravity.
- The new steel bar over the cavity supports the top line and reduces unwanted vibrations
- New lower Center of Gravity placement promotes a high launhing, strong and penetrating ball flight.
- Self-contained Component Kit includes the following supplies:
- 7 x Iron heads, precision cast 431 stainless steel;
- 7 x Apollo standard stepped steel shafts;
- 7 x Rexton Velvet grips (Mens standard size);
- 7 x Ferrules (black);
- 1 x Vise clamp;
- 7 x Grip tape strips (solvent based);
- 4 x Quick epoxy Double Bubble, good for up to 8 clubs;
- Grip solvent not included. Paint thinner available at your hardware store.
Specification
| Iron | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | ||
|
|
||||||||||||
| Loft | 23° | 26° | 29° | 33° | 37° | 41° | 45° | 50° | 55° | 60° | ||
| Lie | 61° | 61.5° | 62° | 62.5° | 63° | 64° | 65° | 65° | 65° | 65° | ||
| Weight | 251 | 258 | 265 | 272 | 279 | 286 | 293 | 302 | 305 | 305 | ||
| Offset | 4.5 | 4.5 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 1.0 | 1.0 | 1.0 | ||
| Bounce | 1° | 1° | 2° | 3° | 4° | 5° | 7° | 11° | 11° | 11° | ||
| Length | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.25" | 35.25" | ||
| Right Hand: | #4 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror Polish |
| Toe Height: | 51 mm (#5 I) | Sole Width: | 23 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Customer feedback
Reviews
There have been no reviews for this product.
