Heater F-35 Black Fairway Wood Component Kit
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Heater F-35 Black Fairway Wood Component Kit
- Compare to TaylorMade® RocketBallz™
- Recessed pockets on sole near clubface increases ball speed.
- Center of Gravity is moved low and forward towards the face for high launchng shots.
- Large, slightly deeper clubface and high MOI profile make it easy to launch.
- Matte Black crown prevents unwanted glaring and makes alignment easy.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater F-35 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| Wood | Loft | Lie | Weight | Volume | Std. Length | ||||
|
|
|||||||||
| #3+ | 13° | 59° | 210 | 180 cc | 43" | ||||
| #3 | 15° | 59° | 210 | 180 cc | 43" | ||||
| #4 | 16.5° | 59.5° | 213 | 175 cc | 42.5" | ||||
| #5 | 18° | 59.5° | 215 | 170 cc | 42" | ||||
| #7 | 21° | 60° | 220 | 160 cc | 41" | ||||
| #9 | 24° | 60.5° | 225 | 150 cc | 40.5" | ||||
| Right Hand: | #3, #5, #7, #9 | Material: | 17-4 Stainless |
| Finish: | Black | Face Angle: | 0º |
| Face Height: | 35.5 mm (#3 W) | Breadth: | 83 mm (#3 W) |
Description
Heater F-35 Black Fairway Wood Component Kit
- Compare to TaylorMade® RocketBallz™
- Recessed pockets on sole near clubface increases ball speed.
- Center of Gravity is moved low and forward towards the face for high launchng shots.
- Large, slightly deeper clubface and high MOI profile make it easy to launch.
- Matte Black crown prevents unwanted glaring and makes alignment easy.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater F-35 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| Wood | Loft | Lie | Weight | Volume | Std. Length | ||||
|
|
|||||||||
| #3+ | 13° | 59° | 210 | 180 cc | 43" | ||||
| #3 | 15° | 59° | 210 | 180 cc | 43" | ||||
| #4 | 16.5° | 59.5° | 213 | 175 cc | 42.5" | ||||
| #5 | 18° | 59.5° | 215 | 170 cc | 42" | ||||
| #7 | 21° | 60° | 220 | 160 cc | 41" | ||||
| #9 | 24° | 60.5° | 225 | 150 cc | 40.5" | ||||
| Right Hand: | #3, #5, #7, #9 | Material: | 17-4 Stainless |
| Finish: | Black | Face Angle: | 0º |
| Face Height: | 35.5 mm (#3 W) | Breadth: | 83 mm (#3 W) |
Product Q&A
Have a question? Need more information? Ask our community.
Customer feedback
Reviews
There have been no reviews for this product.
