Heater F-35 Fairway Wood Component Kit
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Heater F-35 Fairway Wood Component Kit
- Compare to TaylorMade® RocketBallz™
- Recessed pockets on sole near clubface increases ball speed.
- Center of Gravity is moved low and forward towards the face for high launchng shots.
- Large, slightly deeper clubface and high MOI profile make it easy to launch.
- White crown makes alignment easy.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater F-35 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| No. | Loft | Lie | Weight | Volume | Face Height | Club Length | |||
|
|
|||||||||
| #3+ | 13° | 59° | 210 g | 180 cc | 35.5 mm | 43" | |||
| #3 | 15° | 59° | 210 g | 180 cc | 35.5 mm | 43" | |||
| #4 | 16.5° | 59.5° | 215 g | 170 cc | 35.5 mm | 42.5" | |||
| #5 | 18° | 59.5° | 215 g | 170 cc | 35.5 mm | 42" | |||
| #7 | 21° | 60° | 220 g | 160 cc | 35.5 mm | 41" | |||
| #9 | 24° | 60.5° | 225 g | 150 cc | 35.5 mm | 40.5" | |||
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
Heater F-35 Fairway Wood Component Kit
- Compare to TaylorMade® RocketBallz™
- Recessed pockets on sole near clubface increases ball speed.
- Center of Gravity is moved low and forward towards the face for high launchng shots.
- Large, slightly deeper clubface and high MOI profile make it easy to launch.
- White crown makes alignment easy.
- This self-contained Component Kit includes the following supplies:
- 1 x Heater F-35 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| No. | Loft | Lie | Weight | Volume | Face Height | Club Length | |||
|
|
|||||||||
| #3+ | 13° | 59° | 210 g | 180 cc | 35.5 mm | 43" | |||
| #3 | 15° | 59° | 210 g | 180 cc | 35.5 mm | 43" | |||
| #4 | 16.5° | 59.5° | 215 g | 170 cc | 35.5 mm | 42.5" | |||
| #5 | 18° | 59.5° | 215 g | 170 cc | 35.5 mm | 42" | |||
| #7 | 21° | 60° | 220 g | 160 cc | 35.5 mm | 41" | |||
| #9 | 24° | 60.5° | 225 g | 150 cc | 35.5 mm | 40.5" | |||
Product Q&A
Have a question? Need more information? Ask our community.
