X-Force P42 Fairway Wood Component Kit
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
X-Force P42 Fairway Wood Component Kit
- Compare to Ping® G Standard™
- The thinner top plate saves weight and lowers the CG, increases MOI and make it easy to get the ball in the air. Turbulators capture the ball and can aid in alignment.
- New Lower Lead Edge: The lead edge has been lowered getting the ball easily airborne. The lower lead edge slides the face under the equator of the ball so impact occurs higher on the face.
- Rear sole weighting optimizes the CG location and increases the MOI. The result are optimal ball flight for added distance.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- The expanded face-to-back distance increases the MOI for improved forgiveness and increased distance
- This self-contained Component Kit includes the following supplies
- 1 x X-Force 42 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
| Item # | Wood | Loft | Lie | Weight | Volume | Std Length | |||
|
|
|||||||||
| W-XFP42-003 | #3 | 15° | 59° | 208 g | 230 cc | 43" | |||
| W-XFP42-005 | #5 | 18° | 60° | 212 g | 215 cc | 43" | |||
| W-XFP42-007 | #7 | 21° | 61° | 218 g | 200 cc | 42" | |||
| Right Hand: | #3, #5, #7 | Hosel: | 0.335" |
| Face Angle: | 0º | Material: | 17-4 stainless steel |
| Face Height: | 43 mm (#3W) | Face-Rear: | 90.5 mm (#3W) |
Description
X-Force P42 Fairway Wood Component Kit
- Compare to Ping® G Standard™
- The thinner top plate saves weight and lowers the CG, increases MOI and make it easy to get the ball in the air. Turbulators capture the ball and can aid in alignment.
- New Lower Lead Edge: The lead edge has been lowered getting the ball easily airborne. The lower lead edge slides the face under the equator of the ball so impact occurs higher on the face.
- Rear sole weighting optimizes the CG location and increases the MOI. The result are optimal ball flight for added distance.
- Aero-dynamic head profile reduces drag and promotes faster golf club speed for more distance.
- The expanded face-to-back distance increases the MOI for improved forgiveness and increased distance
- This self-contained Component Kit includes the following supplies
- 1 x X-Force 42 Fairway wood head, 17-4 cast stainless steel;
- 1 x SynTech Accuforce 70 100% graphite driver shaft;
- 1 x Rexton Men's Velvet grip;
- 1 x Ferrule (black);
- 1 x Vise clamp;
- 1 x Grip tape strip;
- 1 x Quick epoxy Double Bubble, good for up to 2 clubs.
- Grip solvent not included. Paint thinner available at hardware stores.
Specification
| Item # | Wood | Loft | Lie | Weight | Volume | Std Length | |||
|
|
|||||||||
| W-XFP42-003 | #3 | 15° | 59° | 208 g | 230 cc | 43" | |||
| W-XFP42-005 | #5 | 18° | 60° | 212 g | 215 cc | 43" | |||
| W-XFP42-007 | #7 | 21° | 61° | 218 g | 200 cc | 42" | |||
| Right Hand: | #3, #5, #7 | Hosel: | 0.335" |
| Face Angle: | 0º | Material: | 17-4 stainless steel |
| Face Height: | 43 mm (#3W) | Face-Rear: | 90.5 mm (#3W) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Del on Jul 30, 2023
A
there are no extra weight screws for X-Force fairway woods.
Answered by Monark Golf Admin on Jul 31, 2023
Was the above review useful to you? 
