Mondeo Jet Black Adjustable Cast Titanium Driver Head

 
1 Review(s)  

TW-MJBD

Regular: $159.95

Price: $139.95
Product Name Price Qty
10.5º RH
TW-MJBD-1050
$139.95 In Stock
12º RH
TW-MJBD-1200
$139.95 In Stock
Review Your Order
Number of items :   0
Subtotal :   $0.00
Add to list...
Compare product with:

Mondeo Jet Black Adjustable Cast Titanium Driver Head

  • Two Piece Construction of cast titanium body for improved uniformity and increased accuracy.
  • Cast titanium body eliminates tig welded lines and improves uniformity & accuracy
  • Adjustable Hosel Sleeve: Face Angle is adjustable to prevent a hook or slice for long & straight shots. Adjustable hosel design allows you to adjust the face angle from 1.5º open to neutral to 1.5º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. The adjustable hosel allows you to change the lie angle from 57º to 56º (i.e. 1º upright).
    • - 1.5º Face Angle promotes a distance enhancing draw bias
    • 0º (Square) Face Angle
    • +1.5º Face Angle promotes a fade bias
    • 1º Upright Lie at Square Face
    • The hosel sleeve also allows you to exchange shafts and to play with different shafts.
  • Adjustable sliding weight system changes Center of Gravity, optimizes spin and let you select your preferred bias: distance enhanced draw bias or fade bias
  • Maximum COR for more energy transfer. The new Mondeo Jet Black features a maximum allowed COR for maximum spring-like effort for more distance at less efforts. The CT value has been measured as 247 +/- 10. The USGA has limited the CT (Characteristic Time) to 239 microseconds with a tolerance of up to 10, this is the amount of time there is contact between the clubface of a driver and the ball at the moment of impact. The Jet Black's CT of 247 is at the upper limit of the USGA CT allowed tolerance
  • The expanded face-to-back distance (106 mm) increases the MOI for improved forgiveness and increased distance.
  • Black PVD Finish: Electron plated PVD finish reduces unwanted glaring and lends a high end image to these heads.
  • Head comes with a complimentory wrench, 1 x pre-installed shaft adapter and a special ferrule.
  • Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Loft Lie Weight Volume Face Angle Face Height
10.5° 57° 200 g 460 cc Adjustable 55 mm
12° 57° 200 g 460 cc Adjustable 55 mm

 

Right Hand: 10.5°, 12º Bulge/Roll: 10"/10"
Breadth: 106 mm Hosel Bore: 0.335"
Body Material: Cast 811 Titanium Face Material: 6A-4V Titanium
: *
: *
: *
 
Average customer rating:
 
1 Review(s)  



1 Most useful customer reviews (see all reviews):
John I
Apr 7, 2019
I am a custom club fitter and builder and did not know how much if any the adjustability of this club head would help or not. Well I just hit this head using a UST Proforce HL shaft in regular flex, my swing speed is around 88-90 mph. Its down from mid 90s now that im getting up there in age. I started out on the course with everything set at neutral, after a few holes of hitting a fade, I adjusted the weights on bottom both toward the draw setting and left the hosel adapter in the neutral setting. The rest of the day I didn't miss a fairway and had three drives right at 280 yards, very good distance for me. I usually drive in the 240-250 range with roll. i was absolutely crushing the ball with this setup. The adjustability of this head works and it has a nice sweet spot. I can't say enough about how well this head performs. My playing partner agreed saying he has never seen me hit the ball that far and that accurate! Keep this one around it is definitely a keeper. Again I have been building clubs for 20 plus years and could not be happier.

Advantages: Adjustability that works, and great distance off the face, good sweet spot!

Disadvantages: None as long as you keep the price where it is with the free headcover.
Loading...Was the above review useful to you? Yes (3) / No (0)

Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Dan Neubecker on Jun 16, 2019
A
each weight screw is 6.5 gram (including the slider and screw). Both sliding weights together are 13 gram total weight. There is no further sliding weight available. You can trim a head by applying self-adhesive lead tape outside the head. Item number for lead tape is LT-1
Answered by Monark Golf Admin on Jun 23, 2019


Description

Mondeo Jet Black Adjustable Cast Titanium Driver Head

  • Two Piece Construction of cast titanium body for improved uniformity and increased accuracy.
  • Cast titanium body eliminates tig welded lines and improves uniformity & accuracy
  • Adjustable Hosel Sleeve: Face Angle is adjustable to prevent a hook or slice for long & straight shots. Adjustable hosel design allows you to adjust the face angle from 1.5º open to neutral to 1.5º closed. Choose from three face angle positions so you can achieve the look you want at address and help you square the face to the ball at impact. The adjustable hosel allows you to change the lie angle from 57º to 56º (i.e. 1º upright).
    • - 1.5º Face Angle promotes a distance enhancing draw bias
    • 0º (Square) Face Angle
    • +1.5º Face Angle promotes a fade bias
    • 1º Upright Lie at Square Face
    • The hosel sleeve also allows you to exchange shafts and to play with different shafts.
  • Adjustable sliding weight system changes Center of Gravity, optimizes spin and let you select your preferred bias: distance enhanced draw bias or fade bias
  • Maximum COR for more energy transfer. The new Mondeo Jet Black features a maximum allowed COR for maximum spring-like effort for more distance at less efforts. The CT value has been measured as 247 +/- 10. The USGA has limited the CT (Characteristic Time) to 239 microseconds with a tolerance of up to 10, this is the amount of time there is contact between the clubface of a driver and the ball at the moment of impact. The Jet Black's CT of 247 is at the upper limit of the USGA CT allowed tolerance
  • The expanded face-to-back distance (106 mm) increases the MOI for improved forgiveness and increased distance.
  • Black PVD Finish: Electron plated PVD finish reduces unwanted glaring and lends a high end image to these heads.
  • Head comes with a complimentory wrench, 1 x pre-installed shaft adapter and a special ferrule.
  • Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
Loft Lie Weight Volume Face Angle Face Height
10.5° 57° 200 g 460 cc Adjustable 55 mm
12° 57° 200 g 460 cc Adjustable 55 mm

 

Right Hand: 10.5°, 12º Bulge/Roll: 10"/10"
Breadth: 106 mm Hosel Bore: 0.335"
Body Material: Cast 811 Titanium Face Material: 6A-4V Titanium
Send to friend
: *
: *
: *
 
Customer feedback
Average customer rating:
 
1 Review(s)  



1 Most useful customer reviews (see all reviews):
John I
Apr 7, 2019
I am a custom club fitter and builder and did not know how much if any the adjustability of this club head would help or not. Well I just hit this head using a UST Proforce HL shaft in regular flex, my swing speed is around 88-90 mph. Its down from mid 90s now that im getting up there in age. I started out on the course with everything set at neutral, after a few holes of hitting a fade, I adjusted the weights on bottom both toward the draw setting and left the hosel adapter in the neutral setting. The rest of the day I didn't miss a fairway and had three drives right at 280 yards, very good distance for me. I usually drive in the 240-250 range with roll. i was absolutely crushing the ball with this setup. The adjustability of this head works and it has a nice sweet spot. I can't say enough about how well this head performs. My playing partner agreed saying he has never seen me hit the ball that far and that accurate! Keep this one around it is definitely a keeper. Again I have been building clubs for 20 plus years and could not be happier.

Advantages: Adjustability that works, and great distance off the face, good sweet spot!

Disadvantages: None as long as you keep the price where it is with the free headcover.
Loading...Was the above review useful to you? Yes (3) / No (0)

Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Dan Neubecker on Jun 16, 2019
A
each weight screw is 6.5 gram (including the slider and screw). Both sliding weights together are 13 gram total weight. There is no further sliding weight available. You can trim a head by applying self-adhesive lead tape outside the head. Item number for lead tape is LT-1
Answered by Monark Golf Admin on Jun 23, 2019