Pinhawk SLH (Single Length) Hybrid Heads
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Pinhawk SLH (Single Length) Hybrid Heads
- The new Pinhawk SLH Single-Length Hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length. You also can mix and match the Pinhawk SLH Hybrids with the Pinhawk SL irons too. Contrary to traditional hybrids that vary in length, the SLH hybrids are all designed to be the same length throughout the entire set and have the exact same swingweight and flex, so the golfer only has to “learn” one swing that works for him or her. This enables the golfer’s swing to become more easily repeatable. The suggested men’s length for the Pinhawk SL's is 37.5" (graphite) and 37" (steel), which is a typical 7 iron length.
- The same length design allows to have the same stance, same posture and the exact swing plane for every shot regardless of iron number. These are the factors that allow you to only need just that one swing no matter what shot you’re taking. Golf got easier now. If you are looking for consistence in your iron game, single-length is the way to go.
- 9 lofts available from 20º to 55º to fit any golfer.
- Assembly Instruction for Single Length Hybrids: These hybrids are assembled differently because the head weights stay the same throughout the set. Tip trim the shaft for all heads if it were a #7-iron, regardless if the head is a #4, #9 or SW, i.e. do not tip trim shafts in increments. Cut the butt end to length for all clubs in the set as if were a 7-iron. If someone orders a set +1/2”, then make that length ½” over your standard #7-iron length for all clubs.
| No. | Loft | Lie | Weight | Offset | Vol. | Club Length | |||
|
|
|||||||||
| #4 | 20° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #5 | 25° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #6 | 30° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #7 | 35° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #8 | 39° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #9 | 43° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| PW | 47° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| AW | 51° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| SW | 55° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| Right Hand: | 20º - 55º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 31 mm (20º) | Face-Rear: | 56 mm (20º) |
Description
Pinhawk SLH (Single Length) Hybrid Heads
- The new Pinhawk SLH Single-Length Hybrids offer a unique choice in single-length technology for players looking for consistent ball striking. Golfers of all handicaps can benefit by using these hybrids that are specifically designed to all be played at the same length. You also can mix and match the Pinhawk SLH Hybrids with the Pinhawk SL irons too. Contrary to traditional hybrids that vary in length, the SLH hybrids are all designed to be the same length throughout the entire set and have the exact same swingweight and flex, so the golfer only has to “learn” one swing that works for him or her. This enables the golfer’s swing to become more easily repeatable. The suggested men’s length for the Pinhawk SL's is 37.5" (graphite) and 37" (steel), which is a typical 7 iron length.
- The same length design allows to have the same stance, same posture and the exact swing plane for every shot regardless of iron number. These are the factors that allow you to only need just that one swing no matter what shot you’re taking. Golf got easier now. If you are looking for consistence in your iron game, single-length is the way to go.
- 9 lofts available from 20º to 55º to fit any golfer.
- Assembly Instruction for Single Length Hybrids: These hybrids are assembled differently because the head weights stay the same throughout the set. Tip trim the shaft for all heads if it were a #7-iron, regardless if the head is a #4, #9 or SW, i.e. do not tip trim shafts in increments. Cut the butt end to length for all clubs in the set as if were a 7-iron. If someone orders a set +1/2”, then make that length ½” over your standard #7-iron length for all clubs.
Specification
| No. | Loft | Lie | Weight | Offset | Vol. | Club Length | |||
|
|
|||||||||
| #4 | 20° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #5 | 25° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #6 | 30° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #7 | 35° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #8 | 39° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| #9 | 43° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| PW | 47° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| AW | 51° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| SW | 55° | 62.5° | 272 g | -3 mm | 108 cc | 37" | |||
| Right Hand: | 20º - 55º | Hosel: | 0.370" |
| Finish: | Black | Material: | 431 stainless steel |
| Face Height: | 31 mm (20º) | Face-Rear: | 56 mm (20º) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Owen Ono on Dec 21, 2020
A
this is just a component head, no shaft, no grip.
Answered by Monark Golf Admin on Dec 21, 2020
Q
Do you find this helpful? YES NO
Asked by John on Mar 6, 2022
A
Pinhawk SL hybrids are backordered, they will come back. Unfortunately there is no ETA.
Answered by Monark Golf Admin on Mar 11, 2022
Was the above review useful to you? 
