Heater BMT S-550 Iron Head
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Heater BMT S-550 Iron Head
- Compare to TaylorMade® RSi 2™
- The new Heater BMT3 irons are designed to help golfers have better mis-hits.
- The deep undercut cavity design promotes stability at impact and forgiveness on off-center hits.
- New lower Center of Gravity make it easier to launch for a high, strong, penetrating flight. As CG moves lower on the ball, it promotes a higher ball launch.
- The 17º lofted #3 iron was purposely designed like a #2 iron for golfers who don't want to play with a 17º lofted hybrid due to longer club length.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 17° | 20° | 23° | 26.5° | 30.5° | 34.5° | 39° | 44° | 49.5° | 55° | 60° | |
| Lie | 60.25° | 61° | 61.75° | 62.5° | 63° | 63.5° | 64° | 64.5° | 64.5° | 64.5° | 64.5° | |
| Weight | 245 | 252 | 259 | 266 | 272 | 280 | 287 | 297 | 301 | 305 | 305 | |
| Offset | 6.3 | 5.8 | 5.3 | 4.7 | 4.2 | 3.5 | 3.0 | 2.6 | 1.8 | 1.5 | 1.5 | |
| Bounce | 1.0 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | 9.0 | 11.0 | 13.0 | |
| Length | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.5" | 35.25" | |
| Right Hand: | #3 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror Polish |
| Toe Height: | 54 mm (#5 I) | Sole Width: | 25 mm (#5 I) |
Description
Heater BMT S-550 Iron Head
- Compare to TaylorMade® RSi 2™
- The new Heater BMT3 irons are designed to help golfers have better mis-hits.
- The deep undercut cavity design promotes stability at impact and forgiveness on off-center hits.
- New lower Center of Gravity make it easier to launch for a high, strong, penetrating flight. As CG moves lower on the ball, it promotes a higher ball launch.
- The 17º lofted #3 iron was purposely designed like a #2 iron for golfers who don't want to play with a 17º lofted hybrid due to longer club length.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 17° | 20° | 23° | 26.5° | 30.5° | 34.5° | 39° | 44° | 49.5° | 55° | 60° | |
| Lie | 60.25° | 61° | 61.75° | 62.5° | 63° | 63.5° | 64° | 64.5° | 64.5° | 64.5° | 64.5° | |
| Weight | 245 | 252 | 259 | 266 | 272 | 280 | 287 | 297 | 301 | 305 | 305 | |
| Offset | 6.3 | 5.8 | 5.3 | 4.7 | 4.2 | 3.5 | 3.0 | 2.6 | 1.8 | 1.5 | 1.5 | |
| Bounce | 1.0 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | 9.0 | 11.0 | 13.0 | |
| Length | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.5" | 35.25" | |
| Right Hand: | #3 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Mirror Polish |
| Toe Height: | 54 mm (#5 I) | Sole Width: | 25 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Tommy James on Sep 12, 2019
A
we offer online lie bending for Acer XV iron heads; there is no loft bending. There is no lie nor loft bending for Heater iron heads nor any clone heads. Heater BMT S55 iron heads are 431 stainless steel. Your local clubmaker can bend these iron heads up to +/-2ยบ.
Answered by Monark Golf Admin on Sep 12, 2019
Was the above review useful to you? 
