Heater F-35 Iron Heads
Free Shipping on Orders of $300.00
(for 48 Contiguous States; AK, HI, PR are excluded)$9.95 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Description
Heater F-35 Iron Heads
- Compare to TaylorMade® RocketBallz™
- #3 to #5 Hollow Core Irons: Two-piece metalwood-inspired construction in the #3, #4 and #5 irons promote a low Center of Gravity and high Moment of Inertia. The CG is located deep behind the face for a more solid feel on impact and greater consistency.
- Mid and short irons feature a deep undercut cavity design. The deeply re-set weight in the cavity is positioned toward the toe and heel for maximum forgiveness on off-center shots.
- The new Heater F-35 irons are designed to hit longer and straighter with more accuracy and better feel.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
- Hollow Core irons #3, #4 and #5 is $11.75/ea. Cavity Back irons #6-LW is $9.75/ea.
Specification
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW | |
|
|
||||||||||||
| Loft | 19° | 22° | 24° | 27° | 31° | 35° | 40° | 45° | 50° | 55° | 60° | |
| Lie | 60.25° | 61° | 61.75° | 62.5° | 63° | 63.5° | 64° | 64.5° | 64.5° | 64.5° | 64.5° | |
| Weight | 245 | 252 | 259 | 266 | 272 | 280 | 287 | 297 | 301 | 305 | 305 | |
| Offset | 6.5 | 6.1 | 5.7 | 5.3 | 4.6 | 3.7 | 2.8 | 2 | 1.5 | 1 | 1 | |
| Length | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.5" | 35.5" | |
| Right Hand: | #3 - PW, SW, AW, LW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | Black Coated |
| Toe Height: | 55 mm (#5 I) | Sole Width: | 26 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Don on Feb 4, 2020
A
usually iron heads cast from 431 stainless steel can be bent +/-2º. Lie bending is available online for Acer XV iron heads, not available for Heater irons. Heater F-35 are black finish, bending may cause some scratch marks. Heater F-35 #4 and #5 iron heads are hollow core. Bending may damage the hollow core. We do not recommend bending hollow core irons. Any bending is done by your club maker at his discretion. Thanks.
Answered by Monark Golf Admin on Feb 4, 2020
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Åke Jönsson on Jun 30, 2024
A
all iron heads offered at our website are 0.370 parallel hosel bore. we do not offer iron heads with 0.355 tapered bore.
Answered by Monark Golf Admin on Jul 24, 2024
Was the above review useful to you? 
