Aldila XTORSION Green Graphite Wood Shafts
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Aldila XTORSION Green Graphite Wood Shafts
- Sale: Brand new, original aftermarket component shaft, not an OEM version
- The ALDILA® XTORSION® Green features our classic stiff-tip low launch profile as well as a new and unique woven graphite material on the outer layer of the shaft at the tip-section. This Multi-Axial Material Bias Angle (MAMBA®) Technology places a high-tech material on the shaft in a +/- 45 degree fiber orientation. This unique use of a flat weave material on the exterior of the shaft provides significantly improved torsional stability to this counter weighted shaft in the lower half (tip-section) where the greatest percentage of twisting occurs during the swing and at impact.
- Multi-Axial Material Bias Angle (MAMBA) Technology places a high-tech, flat weave material on the shaft’s lower half exterior, where the most twisting occurs during the swing and at impact. MAMBA® Technology improves torsional stability and spin control where it’s needed the most.
- Low/Mid Launch, low spin design.
- Bend Point: Mid
- Ball Flight: Mid
- Tip Trim: Driver: No tip trim, butt trim to the desired playing length. Fairway Woods: 1".
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Tip Parallel | Flight | ||||
|
|
||||||||||||
| Wood 50 | R | 5.2° | 0.335" | 0.604" | 46" | 56 g | 3" | Low/Mid | ||||
| Wood 60 | S | 4.3° | 0.335" | 0.602" | 46" | 66 g | 3" | Low/Mid | ||||
| Wood 60 | TX | 3.7° | 0.335" | 0.605" | 46" | 68 g | 3" | Low/Mid | ||||
| Wood 70 | S | 3.7° | 0.335" | 0.606" | 46" | 74 g | 3" | Low/Mid | ||||
| Wood 70 | TX | 3.5° | 0.335" | 0.616" | 46" | 75 g | 3" | Low/Mid | ||||
| Wood 80 | TX | 2.9° | 0.335" | 0.610" | 46" | 88 g | 3" | Low/Mid | ||||
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
Aldila XTORSION Green Graphite Wood Shafts
- Sale: Brand new, original aftermarket component shaft, not an OEM version
- The ALDILA® XTORSION® Green features our classic stiff-tip low launch profile as well as a new and unique woven graphite material on the outer layer of the shaft at the tip-section. This Multi-Axial Material Bias Angle (MAMBA®) Technology places a high-tech material on the shaft in a +/- 45 degree fiber orientation. This unique use of a flat weave material on the exterior of the shaft provides significantly improved torsional stability to this counter weighted shaft in the lower half (tip-section) where the greatest percentage of twisting occurs during the swing and at impact.
- Multi-Axial Material Bias Angle (MAMBA) Technology places a high-tech, flat weave material on the shaft’s lower half exterior, where the most twisting occurs during the swing and at impact. MAMBA® Technology improves torsional stability and spin control where it’s needed the most.
- Low/Mid Launch, low spin design.
- Bend Point: Mid
- Ball Flight: Mid
- Tip Trim: Driver: No tip trim, butt trim to the desired playing length. Fairway Woods: 1".
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Tip Parallel | Flight | ||||
|
|
||||||||||||
| Wood 50 | R | 5.2° | 0.335" | 0.604" | 46" | 56 g | 3" | Low/Mid | ||||
| Wood 60 | S | 4.3° | 0.335" | 0.602" | 46" | 66 g | 3" | Low/Mid | ||||
| Wood 60 | TX | 3.7° | 0.335" | 0.605" | 46" | 68 g | 3" | Low/Mid | ||||
| Wood 70 | S | 3.7° | 0.335" | 0.606" | 46" | 74 g | 3" | Low/Mid | ||||
| Wood 70 | TX | 3.5° | 0.335" | 0.616" | 46" | 75 g | 3" | Low/Mid | ||||
| Wood 80 | TX | 2.9° | 0.335" | 0.610" | 46" | 88 g | 3" | Low/Mid | ||||
Product Q&A
Have a question? Need more information? Ask our community.
