Bang Golf Fast Hybrid/Iron Graphite Shaft
Compare product with:
$7.45 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
- The Bang FAST graphite shaft features an ultra lightweight design with low torque, great for golfers seeking more speed and distance plus accuracy.
- FAST (Flow Alignment Shaft Technology): This shaft is factory spine aligned and a sticker is attached on the shaft indicating the "Flow Alignment Line". The benefit is increased consistency, improved uniformity and more consistent recovery rate at moment of impact.
- Made from high strength, high modulus carbon fibers.
- Each shaft is individually and thoroughly tested and graded for accurate flex and tight specifications.
- Bend Point:
- Ball Flight:
- Tip Trimming: #2I 0"; #3I 0.5"; #4 1"; #5 1.5"; #6 2"; #7 2.5"; #8 3"; #9 & Wedge 3.5".
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | LL | 4.4° | 0.370" | 0.600" | 41" | 37 g | High | |||||
| Iron | L | 4.0° | 0.370" | 0.600" | 41" | 39 g | High | |||||
| Iron | A | 3.7° | 0.370" | 0.600" | 41" | 41 g | Mid-High | |||||
| Iron | R | 3.3° | 0.370" | 0.600" | 41" | 42 g | Mid-High | |||||
| Iron | F | 2.9° | 0.370" | 0.600" | 41" | 43 g | Mid-Low | |||||
| Iron | S | 2.5° | 0.370" | 0.600" | 41" | 44 g | Mid-Low | |||||
| Iron | X | 2.1° | 0.370" | 0.600" | 41" | 45 g | Low | |||||
| Iron | XX | 1.9° | 0.370" | 0.600" | 41" | 46 g | Low | |||||
There have been no reviews for this product.
Description
- The Bang FAST graphite shaft features an ultra lightweight design with low torque, great for golfers seeking more speed and distance plus accuracy.
- FAST (Flow Alignment Shaft Technology): This shaft is factory spine aligned and a sticker is attached on the shaft indicating the "Flow Alignment Line". The benefit is increased consistency, improved uniformity and more consistent recovery rate at moment of impact.
- Made from high strength, high modulus carbon fibers.
- Each shaft is individually and thoroughly tested and graded for accurate flex and tight specifications.
- Bend Point:
- Ball Flight:
- Tip Trimming: #2I 0"; #3I 0.5"; #4 1"; #5 1.5"; #6 2"; #7 2.5"; #8 3"; #9 & Wedge 3.5".
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | LL | 4.4° | 0.370" | 0.600" | 41" | 37 g | High | |||||
| Iron | L | 4.0° | 0.370" | 0.600" | 41" | 39 g | High | |||||
| Iron | A | 3.7° | 0.370" | 0.600" | 41" | 41 g | Mid-High | |||||
| Iron | R | 3.3° | 0.370" | 0.600" | 41" | 42 g | Mid-High | |||||
| Iron | F | 2.9° | 0.370" | 0.600" | 41" | 43 g | Mid-Low | |||||
| Iron | S | 2.5° | 0.370" | 0.600" | 41" | 44 g | Mid-Low | |||||
| Iron | X | 2.1° | 0.370" | 0.600" | 41" | 45 g | Low | |||||
| Iron | XX | 1.9° | 0.370" | 0.600" | 41" | 46 g | Low | |||||
Customer feedback
There have been no reviews for this product.
