iDrive Tour Graphite Shafts - Pink
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
iDrive Tour Graphite Shafts - Pink
- Unlike conventional graphite shafts i-Drive graphite shafts are filament wound, not table rolled.
- High modulus material is filament wound around a special forming mandrel. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- Guaranteed 100% high modulus, high strength graphite.
- Popular shafts are mid low flex point and low to mid torque for all level golfers.
- Bend Point: Low-Mid
- Ball Flight: Mid-High
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5"
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.5° | 0.335" | 0.605" | 46" | 67 g | Mid-High | |||||
| Iron | A/L | 4.1° | 0.370" | 0.600" | 41" | 70 g | Mid-High | |||||
Description
iDrive Tour Graphite Shafts - Pink
- Unlike conventional graphite shafts i-Drive graphite shafts are filament wound, not table rolled.
- High modulus material is filament wound around a special forming mandrel. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- Guaranteed 100% high modulus, high strength graphite.
- Popular shafts are mid low flex point and low to mid torque for all level golfers.
- Bend Point: Low-Mid
- Ball Flight: Mid-High
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5"
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.5° | 0.335" | 0.605" | 46" | 67 g | Mid-High | |||||
| Iron | A/L | 4.1° | 0.370" | 0.600" | 41" | 70 g | Mid-High | |||||
Product Q&A
Have a question? Need more information? Ask our community.
Was the above review useful to you? 
