Integra Professional SuperLite 50 Graphite Wood Shafts
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
Integra Professional SuperLite 50 Graphite Wood Shafts
- 50 gram ultra light weight shaft designed for added distance. Available at an affordable price.
- Unlike other graphite shafts, the Integra SL 50 is filament wound, not table rolled, and CPM balanced. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact.
- Made from high strength, high modulus carbon fibres manufactured by Toray Japan.
- If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- R/S shafts are Black finish, A/L are Burgundy finish.
- Ball Flight: Mid-High
- Bend Point: Low-Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1"; #9W 1"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1"; #9W 1"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2".
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.0° | 0.335" | 0.600" | 46" | 50 g | Mid-High | |||||
| Wood | R/S | 3.5° | 0.335" | 0.605" | 46" | 50 g | Mid-High | |||||
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
Integra Professional SuperLite 50 Graphite Wood Shafts
- 50 gram ultra light weight shaft designed for added distance. Available at an affordable price.
- Unlike other graphite shafts, the Integra SL 50 is filament wound, not table rolled, and CPM balanced. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact.
- Made from high strength, high modulus carbon fibres manufactured by Toray Japan.
- If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- R/S shafts are Black finish, A/L are Burgundy finish.
- Ball Flight: Mid-High
- Bend Point: Low-Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1"; #9W 1"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1"; #9W 1"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2"; #9W 2".
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.0° | 0.335" | 0.600" | 46" | 50 g | Mid-High | |||||
| Wood | R/S | 3.5° | 0.335" | 0.605" | 46" | 50 g | Mid-High | |||||
Product Q&A
Have a question? Need more information? Ask our community.
