MCS 70 Orange Graphite Iron Shafts
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
MCS 70 Orange Graphite Iron Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | A/L | 3.9° | 0.370" | 0.600" | 41" | 71 g | Mid | |||||
| Iron | R/S | 3.0° | 0.370" | 0.600" | 41" | 71 g | Low-Mid | |||||
Description
MCS 70 Orange Graphite Iron Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Iron L-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron A-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
- Iron R-Flex: #3I 0"; #4 0.25"; #5 0.5"; #6 0.75"; #7 1"; #8 1.25"; #9 1.5"; Wedge 1.75"
- Iron S-Flex: #3I 1"; #4 1.25"; #5 1.5"; #6 1.75"; #7 2"; #8 2.25"; #9 2.5"; Wedge 2.75"
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | A/L | 3.9° | 0.370" | 0.600" | 41" | 71 g | Mid | |||||
| Iron | R/S | 3.0° | 0.370" | 0.600" | 41" | 71 g | Low-Mid | |||||
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Sporty on Jul 29, 2020
A
shaft puring is not available online. the MCS shaft is filament wound, it is woven, there is virtually no seam.
Answered by Monark Golf Admin on Aug 3, 2020
Was the above review useful to you? 
