MCS 75 Blue Graphite Wood Shafts
Compare product with:
$8.99 LOW FLAT RATE SHIPPING
Toll Free
(877)-551-4653
MCS 75 Blue Graphite Wood Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5".
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.2° | 0.335" | 0.600" | 46" | 71 g | Mid | |||||
| Wood | R/S | 3.3° | 0.335" | 0.605" | 46" | 71 g | Mid | |||||
Was the above review useful to you? Have a question? Need more information? Ask our community.
Description
MCS 75 Blue Graphite Wood Shafts
- Unlike conventional graphite shafts MCS graphite shafts are filament wound, not table rolled. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
- The MCS (Multi Control System) features a mid bend point for controlled trajectory. The firm tip section offers accuracy and superior control.
- The MCS 70/75 share the same specifications and come in two color combinations.
- Guaranteed 100% high modulus, high strength graphite.
- Bend Point: Mid-High
- Ball Flight: Low-Mid
- Tip Trimming:
- Wood L-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood A-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5"
- Wood R-Flex: Driver 0"; #3W 0.5"; #5W 1"; #7W 1.5"; #9W 1.5"
- Wood S-Flex: Driver 1"; #3W 1.5"; #5W 2"; #7W 2.5"; #9W 2.5".
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Wood | A/L | 4.2° | 0.335" | 0.600" | 46" | 71 g | Mid | |||||
| Wood | R/S | 3.3° | 0.335" | 0.605" | 46" | 71 g | Mid | |||||
Product Q&A
Have a question? Need more information? Ask our community.
