UST MP6 Micro Lite Iron Graphite Shaft
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
UST MP6 Micro Lite Iron Graphite Shaft
- The MP6 Micro Lite Iron Shaft is made from multiple thin layers using advanced aerospace Micro Ply Technology for improved feel without sacrificing performance.
- New lightweight graphite iron shaft in the mid 60 gram range.
- Great for golfers seeking performance and rock solid feel.
- Bend Point: Low-Mid
- Ball Flight: Mid-High
- Swing Speed: 75-85 mph (A), 85-95 mph (R), 95-105 mph (S).
- Tip Trimming: #2I 0.5"; #3I 1"; #4I 1.5"; #5I 2"; #6I 2.5"; #7I 3"; #8I 3.5"; #9 I & Wedge 4"
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | L | 4.5° | 0.370" | 0.578" | 39" | 62 g | High | |||||
| Iron | A | 4.3° | 0.370" | 0.596" | 41" | 60 g | High | |||||
| Iron | R | 4.3° | 0.370" | 0.599" | 41" | 62 g | Mid-High | |||||
| Iron | S | 4.3° | 0.370" | 0.600" | 41" | 64 g | Mid-High | |||||
Description
UST MP6 Micro Lite Iron Graphite Shaft
- The MP6 Micro Lite Iron Shaft is made from multiple thin layers using advanced aerospace Micro Ply Technology for improved feel without sacrificing performance.
- New lightweight graphite iron shaft in the mid 60 gram range.
- Great for golfers seeking performance and rock solid feel.
- Bend Point: Low-Mid
- Ball Flight: Mid-High
- Swing Speed: 75-85 mph (A), 85-95 mph (R), 95-105 mph (S).
- Tip Trimming: #2I 0.5"; #3I 1"; #4I 1.5"; #5I 2"; #6I 2.5"; #7I 3"; #8I 3.5"; #9 I & Wedge 4"
Specification
| Shaft | Flex | Torque | Tip | Butt | Length | Weight | Flight | |||||
|
|
||||||||||||
| Iron | L | 4.5° | 0.370" | 0.578" | 39" | 62 g | High | |||||
| Iron | A | 4.3° | 0.370" | 0.596" | 41" | 60 g | High | |||||
| Iron | R | 4.3° | 0.370" | 0.599" | 41" | 62 g | Mid-High | |||||
| Iron | S | 4.3° | 0.370" | 0.600" | 41" | 64 g | Mid-High | |||||
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Jw on Jan 29, 2023
A
this shaft is 0.370 tip dia and can be used for building hybrids. UST discontinued the MP shaft for hybrids.
Answered by Monark Golf Admin on Feb 9, 2023
Q
Do you find this helpful? YES NO
Asked by Thomas Zachariah on Aug 23, 2023
A
first you do tip trim following the online tip trim instruction for this particular shaft. then install head on shaft and let epoxy dry. Afterwards you trim the shaft from butt end to desired club length.
Answered by Monark Golf Admin on Aug 23, 2023
See all 3 questions for this product
Was the above review useful to you? 
