Kinetixx Ballistic Graphite Wood Shaft Built with Adapter & Grip

Kinetixx Ballistic Graphite Wood Shaft Built with Adapter & Grip

• Kinetixx Ballistic is a Mid-Balance, Mid-Kick point advanced composite shaft pre-loaded with a visible fiber structural grid Engineered according to each flex, delivering balanced strength from butt to tip, producing medium-high Ballistic trajectory with exceptional stability and feel.
• Filament Wound Vacuum Cured Construction technology produces round, pre-loaded concentric and spineless golf shafts for incomparable stability, dynamic response and feedback. Ballistic is the only Filament Wound shaft on the market with Vacuum Curing Process.
• Filament Wound shafts are not table rolled but woven from one endless thread of carbon fibers. The result is virtually no spine for increased consistency, improved uniformity and more consistent recovery rate at moment of impact. If all the talk about spine aligning and shaft pureing made you confused, don't look further.
• Fitting the widest array of players and swing types. Each shaft profile and flex present a visible, pre-loaded fiber architecture.
• Tension tailored for torsional recovery and attenuation of vibration, for the purest kinetic energy transfer from shaft to clubhead.
• KINETIXX loaded kevlar BALLISTIC series features the world's only continuous fiber filament wound kevlar construction technology.
• Optimizing the extraordinary advanced composite material properties producing shafts with an incredibly high tensile strength-to-weight ratio, 5x stronger than steel, with 20x the elastic strength.
• Kinetixx Shafts feature Vaccum-Cured Technology: Vacuum Cured to minimize resin content, optimizing elastic strength and dynamic recovery properties of the Nano-Carbon Amorphous material. Enhancing feedback and delivering an extraordinarily flexible and forgiving shaft.
• Static Curing Method vs. Vacuum Curing Process: All table rolled shafts are made with static curing method resulting in lack of control over resin contents. Limited or incomplete coverage of fibers with resin causes resin pooling, voids and fiber 'washout'. Another disadvantage is that valuable fibers are unnecessarily cut during the center-less grinding process. Kinetixx's Proprietary Vacuum Curing Process increases consistency, allows for homogenous resin to fiber coverage ratio and minimizes resin to improve fiber performance.
• Kinetixx Ballistic features a Mid-High launch profile.
• Bend Point: Mid-Low
• Ball Flight: Mid-High
• Swing Speed: 
• Measure Shaft Length: Please measure the length of your current shaft (not club length) as we don't have your shaft in our store.
  • Remove shaft from your club length.
  • Remove the screw or bolt from hosel adapter
  • Measure length of your current shaft, measure length from tip end of adapter to the butt end of grip
  • Write the desired shaft length of your new shaft into the field "Shaft Length"
• This is a built-to-order assembled shaft + adapter + grip item. Please allow 3 business days for the shaft installation.
• Your new shaft is trimmed to your specification. Order cannot be cancelled once assembly has begun. No return allowed, sales are final.
• Please allow +/- 1/4 inch tolerance between new and old shaft; it is not considered a defect. 
• Note: This shaft is a Pre-Order (Non-Inventory Item). Please allow additional 5 days processing time prior to shipping.