Mitsubishi Tensei 1K Pro Blue Graphite Wood Shaft Built with Adapter & Grip

Mitsubishi Tensei 1K Pro Blue Graphite Wood Shaft Built with Adapter & Grip

• TENSEI 1K Pro Blue is the mid-launch, mid-spin member of the 1K Pro family. TENSEI 1K Pro Blue is built with a super-stiff handle section designed to amplify activity in the tip section to maximize ball speed. The mid-launching, mid-spinning TENSEI 1K Pro Blue – built on the lessons learned from CK Blue and AV Blue – is the next step forward in our lineage of TENSEI Blue products. Blue uses super-premium 1K carbon fiber in the handle for maximum stability as well as our breakthrough Xlink Tech Resin System to drastically increase carbon fiber volume while increasing the shaft's overall strength. Everything to do with TENSEI 1K Pro Blue enhances the stiffness profile of the shaft to control curvature during the swing to increase club head speed. 
• Super premium 1K Carbon Fiber for stability during swing
• Xlink Tech Resin System – multi-phase resin, higher strength, lower weight. Xlink Resin System creates a carbon-rich structure that is stronger and more responsive.
• MR70 – tensile strength of over 1000 psi. MR70 is an innovative carbn fiber material that is 20% stronger with a 10% greater modulus than conventional materials
• High modulus 46t bias plies for lower torque
• Low resin content prepreg for lighter weight and improved feel
• Boron in the tip section – high stiffness for stability and high compression strength for durability
• In totality, the enhanced stiffness profile controls curvature of the shaft during the swing to maximize head speed
• Who should play it? Anyone looking for a mid launch, mid spin super stiff handle who needs a little ball speed.
• Bend Point: Mid
• Ball Flight: Mid
• Swing Speed: 80 mph (R), 81-90 mph (R/S), 91-105 mph (S), 106+ mph (X/TX)
• Tip Trimming: Driver: 0"; #3 W: 0.5"; #5 W: 0.75"; #7 W: 1"; #9 W: "
• Note: This shaft is a Pre-Order Item and usually ships within 3-5 business days.
• Measure Shaft Length: Please measure the length of your current shaft (not club length) as we don't have your shaft in our store.
  • Remove shaft from your club head.
  • Remove the screw or bolt from hosel adapter
  • Measure length of your current shaft, measure length from tip end of adapter to the butt end of grip
  • Write the desired shaft length of your new shaft into the field "Shaft Length"
• This is a built-to-order assembled shaft + adapter + grip item. Please allow 3 business days for the shaft installation.
• Your new shaft is trimmed to your specification. Order cannot be cancelled once assembly has begun. No return allowed, sales are final.
• Please allow +/- 1/4 inch tolerance between new and old shaft; it is not considered a defect.