Custom-Built Acer XDS Hybrid Irons
Free Shipping on Orders of $300.00
(for 48 Contiguous States; AK, HI, PR are excluded)$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Description
Custom-Built Acer XDS Hybrid Irons
- The new Acer XDS Hybrid Irons offer a natural and smooth transition on every club throughout the entire set.
- Natural Transition from Club to Club: True wide-sole design on the long irons for superior forgiveness, true thin-soles on the short irons for superior accuracy with a natural transition in between. No more shock moving from long to mid to short irons.
- Hollow-Core two-piece construction: The hollow body positions weight low and rearward for improved forgiveness.
- High MOI design for more stability and increased forgiveness
- Thin Cup Face with variable face thickness. The thinner perimeter area promotes more face flexing for more ball speed
- Please allow 3 business days for custom club building
Specification
| Iron | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | |||
|
|
||||||||||||
| Loft | 21° | 24° | 27° | 30° | 34° | 39° | 44° | 49° | 55° | |||
| Lie | 60.5° | 61° | 61.5° | 62° | 63° | 63.5° | 64° | 64° | 64° | |||
| Weight | 249 | 256 | 263 | 270 | 277 | 284 | 291 | 291 | 298 | |||
| Offset | 3.5 | 3.2 | 2.9 | 2.6 | 2.3 | 2.1 | 1.9 | 1.9 | 1.9 | |||
| Bounce | 3° | 3° | 3° | 3.5° | 4.5° | 5° | 8° | 8° | 10° | |||
| Length | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.5" | 35.25" | |||
| Right Hand: | #4 - PW, AW, SW | Hosel Bore: | 0.370" |
| Material: | 431 Stainless | Finish: | . |
| Toe Height: | mm (#5 I) | Sole Width: | mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Bill on Jul 11, 2023
A
club building takes 2 to 3 biz days. shipping out of Los Angeles/CA. Transit time depends on your destination.
Answered by Monark Golf Admin on Jul 14, 2023
Q
1 out of 1 found this question helpful. Do you? YES NO
Asked by Randy Lang on Apr 5, 2024
A
i can custom build you hybrid clubs as single length clubs, i.e. same club length throughout a set. However the lie angle cannot be adjusted to the club length. the lie angle might not fit if the club length is much different from the orig intended length. there is no warranty for playability. no return privilege for any custom built clubs. iWin SL Hybrids are designed for Single Length club length.
Answered by Monark Golf Admin on Apr 8, 2024
Was the above review useful to you? 
