Bang Golf Classic I TourTools Iron Heads
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Bang Golf Classic I TourTools Iron Heads
- The Bang Golf Tour Tools Classic I is an exact replica of the 1978 Wilson Staff FG17 blade iron. Form forged in 304 stainless steel for exceptional feel and adjustability. One of the cleanest blades ever produced. Available #1 thru SW.
- Precision cast from soft 304 stainless steel rivaling the nice soft, solid feel of a forged iron without the forged price. The soft stainless steel also allows for more bending options than conventional steel.
- Form-forged or semi forged: the raw cast iron heads are afterwards stamped for additonal precision and better control of grain consistency in the steel. Grain consistency provides for more uniform vibration and feel acress the head.
- The non-offset hosel, thin sole and low profiled face are designed for golfers seeking maximum shot control and increased ability to work the ball.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Iron | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | SW | |
|
|
||||||||||||
| Loft | 17° | 19° | 22° | 26° | 29° | 32° | 36° | 40° | 44° | 49° | 54° | |
| Lie | 56° | 57° | 58° | 59° | 60° | 61° | 62° | 63° | 64° | 64° | 64° | |
| Weight | 228 | 235 | 242 | 249 | 256 | 263 | 270 | 277 | 284 | 293 | 300 | |
| Offset | . | . | . | . | . | . | . | . | . | . | . | |
| Bounce | .º | .º | .º | .º | .º | .º | .º | .º | . | .º | . | |
| Length | 40" | 39.5" | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.25" | |
| Right Hand: | #1 - 9, PW, SW | Hosel Bore: | 0.370" |
| Material: | 304 Stainless Steel | Face Width: | 54 mm (#5 I) |
| Toe Height: | 50 mm (#5 I) | Sole Width: | 18 mm (#5 I) |
Description
Bang Golf Classic I TourTools Iron Heads
- The Bang Golf Tour Tools Classic I is an exact replica of the 1978 Wilson Staff FG17 blade iron. Form forged in 304 stainless steel for exceptional feel and adjustability. One of the cleanest blades ever produced. Available #1 thru SW.
- Precision cast from soft 304 stainless steel rivaling the nice soft, solid feel of a forged iron without the forged price. The soft stainless steel also allows for more bending options than conventional steel.
- Form-forged or semi forged: the raw cast iron heads are afterwards stamped for additonal precision and better control of grain consistency in the steel. Grain consistency provides for more uniform vibration and feel acress the head.
- The non-offset hosel, thin sole and low profiled face are designed for golfers seeking maximum shot control and increased ability to work the ball.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Iron | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | SW | |
|
|
||||||||||||
| Loft | 17° | 19° | 22° | 26° | 29° | 32° | 36° | 40° | 44° | 49° | 54° | |
| Lie | 56° | 57° | 58° | 59° | 60° | 61° | 62° | 63° | 64° | 64° | 64° | |
| Weight | 228 | 235 | 242 | 249 | 256 | 263 | 270 | 277 | 284 | 293 | 300 | |
| Offset | . | . | . | . | . | . | . | . | . | . | . | |
| Bounce | .º | .º | .º | .º | .º | .º | .º | .º | . | .º | . | |
| Length | 40" | 39.5" | 39" | 38.5" | 38" | 37.5" | 37" | 36.5" | 36" | 35.5" | 35.25" | |
| Right Hand: | #1 - 9, PW, SW | Hosel Bore: | 0.370" |
| Material: | 304 Stainless Steel | Face Width: | 54 mm (#5 I) |
| Toe Height: | 50 mm (#5 I) | Sole Width: | 18 mm (#5 I) |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by George F. (Fred) Hoaglin on Apr 20, 2024
Q
Do you find this helpful? YES NO
Asked by George F. (Fred) Hoaglin on Apr 20, 2024
A
the hosel bore is 0.370" parallel. Shafts with 0.370 par tip will fit.
Answered by Monark Golf Admin on Apr 24, 2024
Was the above review useful to you? 
