Warrior Ti-460 Titanium Driver Head
$9.49 LOW FLAT
RATE SHIPPINGToll Free
(877)-551-4653
Compare product with:
Warrior Ti-460 Titanium Driver Head
- 460cc oversize club head provides the highest achievable Moment of Inertia (MOI)
- Rear Weighting: Descretional weight is relocated to the rear to promote a higher trajectory for more distance at less efforts. The rear weighting also increases MOI, i.e. resistance to twisting.
- Perimeter Weights strategically located at the heel and toe areas increase MOI to improve stability at impact and increase forgiveness on off-center shots
- Deep Face design (58 mm) is boosting confidence at address.
- Clearance Sale: NO warranty for this head due to low price.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
| Loft | Lie | Wgt. | Vol. | Angle | Face Height | ||||
|
|
|||||||||
| 8° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| 9° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| 11° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| Right Hand: | 8°, 9°, 11° | Material: | Forged 6AL4V Titanium |
| Finish: | Black | Hosel Bore: | 0.335" |
| Driver Breadth: | 97 mm | Bulge/Roll: | . |
Description
Warrior Ti-460 Titanium Driver Head
- 460cc oversize club head provides the highest achievable Moment of Inertia (MOI)
- Rear Weighting: Descretional weight is relocated to the rear to promote a higher trajectory for more distance at less efforts. The rear weighting also increases MOI, i.e. resistance to twisting.
- Perimeter Weights strategically located at the heel and toe areas increase MOI to improve stability at impact and increase forgiveness on off-center shots
- Deep Face design (58 mm) is boosting confidence at address.
- Clearance Sale: NO warranty for this head due to low price.
- Loft, Lie, Face Angle +/- 1°; Weight +/- 3 gm tolerance.
Specification
| Loft | Lie | Wgt. | Vol. | Angle | Face Height | ||||
|
|
|||||||||
| 8° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| 9° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| 11° | 59° | 200 g | 460 cc | 0° Square | 58 mm | ||||
| Right Hand: | 8°, 9°, 11° | Material: | Forged 6AL4V Titanium |
| Finish: | Black | Hosel Bore: | 0.335" |
| Driver Breadth: | 97 mm | Bulge/Roll: | . |
Product Q&A
Have a question? Need more information? Ask our community.
Q
Do you find this helpful? YES NO
Asked by Roy on Nov 8, 2023
A
this is a component head without a shaft or grip. Hosel bore is 0.335". A shaft with 0.335" tip dia will fit.
Answered by Monark Golf Admin on Nov 8, 2023
Customer feedback
Reviews
Was the above review useful to you? You May Also Like
WCG Max Edge Hybrid Heads
$18.95
